Are any of you 6000HXC owners having a problem with the unit heating up and rebooting and then getting stuck in a reboot loop? That's what mine is doing. If I kill power on the rear power switch til it cools down, it works fine for a while until it heats back up. I've sent it back to Panarex four times. Each time it comes back with a different problem but this is the latest. Needless to say, I'm not real happy with Panarex right now. I'm going to attempt to fix it myself. Any ideas would be appreciated.

101

Are any of you 6000HXC owners having a problem with the unit heating up and rebooting and then getting stuck in a reboot loop? That's what mine is doing. If I kill power on the rear power switch til it cools down, it works fine for a while until it heats back up. I've sent it back to Panarex four times. Each time it comes back with a different problem but this is the latest. Needless to say, I'm not real happy with Panarex right now. I'm going to attempt to fix it myself. Any ideas would be appreciated.

101

All I can suggest is to put the machine out in the open out of TV unit and while it is out double check your wires for tightness. Also make sure that there is no dust blocking the vent holes.

mlew2 - Thanks for the response. I've tried all of that and it's still bad. I know it's not my antenna or wiring because I have a 3500s and a DSR-922 4DTV running like a champ on the same system. The 6000HXC even reboots after about 15 mins with nothing hooked up to it but the power cord. I'm thinking it's a power supply issue.