Google
Web forums.dsstester.com

View Full Version : When I scan 2 SATS 1 by 1 , I got only one dish channels


izack
05-12-2007, 02:19 AM
1) - When I scan 110w first I got all 156 channels,
2) - Then I scan 148w & during scaning I notice I got 351 channels, when the scanning complited then exit out to watch TV. Now it shows only 110w channels & there is no 148w channels at all.

Satellite name : 110w ------------ 148w
LNB Freq : 11250 ----------- 11250
LNB Type : Normal ------------ Normal
22Khz : On ------------ Off
Diseqc Number : 1 ------------ 2
Legacy SW : Off ----------- Off
Motorized System : None ---------- None

I try to check by clicking SAT Button, then it shows there
All satellites
Echostar Packet
1 EchoStar6,8 (110w) --- Only this one sat shows here, how I can see both the sats here.

How I can see this both dishes 110w &148w second dish channels all togather, when I come out to watch TV.............Thanks for your reply

izack
05-12-2007, 03:50 AM
I have the switch
1) --- VIEWSAT, SW-41, 4 IN 1 DisEqc SWITCH, Frequency :900-2400MHz, Insertion loss : 3dB, Isolation Port :>25dB, Power Passing : 500mA

The above info written on the switch.

What kind of switch I have to use with this CW600S Premium, in order to connect more than one DISH........


2) --- I have another one more switch written on it DIGIWAVE GD-41A
Frequency Range :950-2400MHz
Insertion Loss :3dB
Power Passing :500mA Max

Is this work for CW600S Premium


Thanks again

hififry
05-12-2007, 07:15 AM
try scanning your sats one at a time with a direct connection to the dish with no switch connected after your scans are complete then hook up he switch and see if it works I have always had better luck not scanning through a disc eq try it out and post bcak your results

chuck baker
05-12-2007, 11:32 AM
you need to be more specific about your equiptment. if indeed you have 2 seperate dishes and 1 pointed at 110 and the other at 148 then connect 110 to diseq port 1 and 148 to port 3. go into setup and set diseqs the same. see if you get quality and signal on each. if so blind scan 1 at a time. my 2nd question is why you want 148, for dishnetwork you want 110 and 119. please post back exactly which dish and lnb you have for each sats and we can help you more.
chuck baker