Google
Web forums.dsstester.com

View Full Version : big problem with cw600s


einstrop
04-30-2007, 05:59 AM
All the ppv channels and more are missing in my cw600s. I tried to use a channel master list and updated with lyngsat web page. I corrected all the transponders and channels and follow the isntructions posted regarding the Channel mater for cw600s. It did not worked, the channels are in the list but I can't see them. I tried the factory defult but nothing even when I eneble the patch. Please help. The box is loaded as follows:

cx_kround
h/w V1.00
s/w V1.34
loader v2.50

chuck baker
05-10-2007, 09:31 AM
do not use a channel list. rescan your sats. use blind scan. you should get close to 300 channels on each sat. if not you need to peak your antenna so it sees all transponders. also be sure settings are correct in installation. if you have dish pro lnb, be sure to set lnbs to 0sc-dp
chuck baker

miketheman
05-10-2007, 10:41 AM
Do a factory default, channel list only, go in check your lnb settings and do a red button scan. This will fix your PPV problems and your other missing channels. I have about a dozen 600's models and about half of them never work right when loading a channel list. It doesnt take long to scan them in also make sure you have the long names turned on in OSD settings, this will help from getting the Program listing instead of the actual channel name. Another hint on filling up the guide that i found that works well is letting it set on channel 119 for a few minutes then channel 200 and finnaly channel 503, this seems to fill my guide up for 8 to 12 hours. Hope this helps.

preludexl
05-28-2007, 06:32 PM
Do a factory default, channel list only, go in check your lnb settings and do a red button scan. This will fix your PPV problems and your other missing channels. I have about a dozen 600's models and about half of them never work right when loading a channel list. It doesnt take long to scan them in also make sure you have the long names turned on in OSD settings, this will help from getting the Program listing instead of the actual channel name. Another hint on filling up the guide that i found that works well is letting it set on channel 119 for a few minutes then channel 200 and finnaly channel 503, this seems to fill my guide up for 8 to 12 hours. Hope this helps.


:beer: Yup props for the last line.