Searched around for a rom10 Icam blocker and turned up nothing. Can someone point me in the right direct?

Thanks in advance.

Darinald I have been useing Dishwiz 103 B2 kill blockers version 2 for some time now, it does not autoroll but it works and you dont have to move data.

got a question on that blocker.

Do I copy and past the bin info into the blocker?

$A6F0=026502026412121A0202320505330202
; BEGIN DATA AREA $A700
; ADD YOUR DATA AREA HERE
;
;
;
; LOCK ENTIRE PATCH - WRITE IS FINISHED

Also, where is the corect location for the cam id?

On the virgin bn of a icam the data starts at A500,
On the virgin bn of plastic the data starts at A700
The only reason data is moved is if your gonna use a blocker for plastic
Now I glitched my cam onboard, saved it, made copies
Used MR-TierWorks v2.3 to update every thing. Saved that bn
Open the updated bn with N2Edit 2.55 cleaned codespace, applied blocker and wrote to card.
One thing That I have learned about all this is after you apply the blocker, try to read the cam, make sure it says (provider DishNetwork)and(failed to read) if it says (provider unknown) Do not remove card from loader, Do not restart the program, Go Directly to unlock card and try to unlock card With password. In my case 95% of the time the card will unlock and read, you may then start over if you wish, but once you put the card in the stream at
Provider unknown it is hard if not impossible to get back in.

still all black with new keys and blocker.

still all black with new keys and blocker.

I have been using Dishwiz's Icam blocker it has been working for months but now even with active keys I have the same result as you I will post any info I find on a new blocker here.

Open your bn up in RomExplorer, go to Data space, click on Ird info, look down the list on the right, Ird status should be (01). Expire Date at what ever you listed.
Next go to provider info, then down the list to Ird status byte should be (03)
Next is spinding limits Ird status byte should be (41) and Expire date to what ever you listed before.
The Idea with changing the statis bytes is the receiver may have been desubed by dish

Open your bn up in RomExplorer, go to Data space, click on Ird info, look down the list on the right, Ird status should be (01). Expire Date at what ever you listed.
Next go to provider info, then down the list to Ird status byte should be (03)
Next is spinding limits Ird status byte should be (41) and Expire date to what ever you listed before.
The Idea with changing the statis bytes is the receiver may have been desubed by dish

so you are still up using this blocker from Dishwiz?? it was working for me and none of the channels are coming up red in the guide so are you sure that the tiers are the problem?

so you are still up using this blocker from Dishwiz?? it was working for me and none of the channels are coming up red in the guide so are you sure that the tiers are the problem?

No Im not saying tiers are expired, he is just starting up with this receiver, then it may have been desubed, reactivating the status byte will on the cam will send this info to the receiver.
and yes Im still up with this blocker.

you didnt have too apply any patch in the last couple of weeks this is driving me crazy I had it going fine and now I have a black screen I am sure the keys are correct and I am using version 2 of the dishwiz patch, thanks for your help Darinald please post of you get this going using this blocker.

Can a rom 103 with this blocker be used with public info in an IRD currently using a rom 102 with public info?
I have an unlocked rom 103 BGA chip mounted onto a rom 10 card that I want to use as a regular plastic card.

Open your bn up in RomExplorer, go to Data space, click on Ird info, look down the list on the right, Ird status should be (01). Expire Date at what ever you listed.
Next go to provider info, then down the list to Ird status byte should be (03)
Next is spinding limits Ird status byte should be (41) and Expire date to what ever you listed before.
The Idea with changing the statis bytes is the receiver may have been desubed by dish

Downloaded the new verion of Romexplorer....

I'll look over the bin again.

you didnt have too apply any patch in the last couple of weeks this is driving me crazy I had it going fine and now I have a black screen I am sure the keys are correct and I am using version 2 of the dishwiz patch, thanks for your help Darinald please post of you get this going using this blocker.
all I can tell you about that is I have been useing this blocker sence it came out, never used A/R just dont trust them.but I would sugest going back over all the steps, cuz its still going strong for now.
Can a rom 103 with this blocker be used with public info in an IRD currently using a rom 102 with public info?
I have an unlocked rom 103 BGA chip mounted onto a rom 10 card that I want to use as a regular plastic card.

103 is for dule tuner receivers, but I think it can be spoofed to a 102, ill have to look more into that.

Open your bn up in RomExplorer, go to Data space, click on Ird info, look down the list on the right, Ird status should be (01). Expire Date at what ever you listed.
Next go to provider info, then down the list to Ird status byte should be (03)
Next is spinding limits Ird status byte should be (41) and Expire date to what ever you listed before.
The Idea with changing the statis bytes is the receiver may have been desubed by dish

All of the items were as you stated...so I changed them to your values. Still all black stations. I get the free stations and can watch the recodings off the hard drive. :wacko:

Any ideas?

Stryker1:yes:

Darinal, Did you glitch this cam onbord, or did you pull the cam to use on another receiver?

Darinal, Did you glitch this cam onbord, or did you pull the cam to use on another receiver?

Mod was done bya VIP member here. The is the original cam to the unit. As stated before, How can there be movies on the hard drive (showtime, TLC, ect...) without being subbed?