hello did anyone try the bin for cw600s132 /because i try my receiver stay on boot and the scream was black and white ....thanks ...mary joe....

yea, was reading on other site. seems to be a premium file not for the regular. you'll have to turn it on in boot mode and flash with the 1.30 bin. should work fine then. just turn the unit off in the back. hold down the power button on the front while turning unit back on from the back.. will go into boot mode. then load the bin with serial cable. good luck

yea, was reading on other site. seems to be a premium file not for the regular. you'll have to turn it on in boot mode and flash with the 1.30 bin. should work fine then. just turn the unit off in the back. hold down the power button on the front while turning unit back on from the back.. will go into boot mode. then load the bin with serial cable. good luck

witch one sould i use thanks.....

Are you saying the CW600S file uploaded in the file area is the wrong one, for Premium and not the Standard?
I installed the CW600SV1.32_05032007.bin and it worked fine.

Are you saying the CW600S file uploaded in the file area is the wrong one, for Premium and not the Standard?
I installed the CW600SV1.32_05032007.bin and it worked fine.

did u use this file on cw600s or 600p.i have a 600s and i used this bin 132 it stayed on boot and the colour went black and white .....thanks..... mary joe.......

The file named in my post above is for the CW600S Standard, not Premium. But I didn't download it here. I always use the older CW600S_v1.05.EXE loader for my CW600S too. I don't have a Premium. Could be some corruption in the file uploaded here, but I don't know.

manor, try this file. It's the one I used and is working fine...autrolls too.
http://forums.dsstester.com/vbb/showthread.php?p=505476#post505476