farmer13
02-07-2007, 01:26 PM
It appears the auto roll didn't work last nite. does anyone have a new 102FullRom Bin file that will get it working again??
|
View Full Version : Arm went down last nite farmer13 02-07-2007, 01:26 PM It appears the auto roll didn't work last nite. does anyone have a new 102FullRom Bin file that will get it working again?? Pin 02-07-2007, 10:27 PM That would be nice :D Wild_Byte 02-08-2007, 03:36 PM Just edit your eeprom bin file and add keys for now. Chuck ain't changed keys since last night. It looks as tho it will take a ebin (firmware) update for the arm to roll again. superdave49 02-09-2007, 02:52 AM Anyone know of a fix for the armulator card.. also mine is saying smart card not inserted correctly 019 what does that mean Big Dismal 02-09-2007, 03:17 AM Anyone know of a fix for the armulator card.. also mine is saying smart card not inserted correctly 019 what does that mean I don't have an Armulator to test with but that is a common error with 102s and Atmegas if the card is not making good contact or is programmed wrong. May want to try again. A common list of error messages that you can get on receivers is listed in the FAQs area, I think. farmer13 02-09-2007, 09:20 AM Just edit your eeprom bin file and add keys for now. Chuck ain't changed keys since last night. It looks as tho it will take a ebin (firmware) update for the arm to roll again. I'm really green at this, what program do I use to edit the bin file?? jakester15 02-09-2007, 06:05 PM I'm really green at this, what program do I use to edit the bin file?? I've been using NagraMaster to update the keys. Idea Key 86 is the key0 line, and Idea key 96 is the key1 line. Cut and paste the new keys. Don't try to change any of the local stuff, or your arm won't work. Also, you can save the file as a ".bin" file so it will take with Armedit. Just redo the "rom102_rev10B_Blockerless.bin file. Works every time for me..... farmer13 02-10-2007, 06:41 AM I've been using NagraMaster to update the keys. Idea Key 86 is the key0 line, and Idea key 96 is the key1 line. Cut and paste the new keys. Don't try to change any of the local stuff, or your arm won't work. Also, you can save the file as a ".bin" file so it will take with Armedit. Just redo the "rom102_rev10B_Blockerless.bin file. Works every time for me..... How do I get the card info into Nagramaster? Wild_Byte 02-10-2007, 08:20 AM Read the eeprom with armulator edit and save to disk as a .bin file then open with Nagramaster. Edit the keys of the bin file as was mentioned above, then resave. Write the eeprom .bin file that you saved back to the arm with armulator edit. |