IS THERE ANYTHING I CAN DO TO GET MORE CHANNELS ON THE BLIND SEARCH. EchoStar 7 at 119.0° I ONLY GET 220 CHANNELS.

same amount of channels I get too.

Are you using the Standard LNB setting or the DISHPRO setting. And if using Standard is it set to both, or just horizontal or vertical.

I'm Using
Lnb Type Standard
Lnb Freq 10678
Diseqc Lnb2
Polarity Vertcal
67% Signal
Are The Channels Pre Determined In The Bin. If So Can I Modify My Bin And How.

need to know more about your dish and what switch you are using....

I got 1023 channels before remov dupd... echo8,10 & echo 7

Looks like LNB setup is wrong... should be set to Standard, LnB freq 11250
If you only have one LNB get rid of DiseqC setting, and any cabling/switch you have...cable direct to STB...polarity should be both...

I'm assuming you have a Standard LNB, legacy or equivalent...ALways give more detail than you think we need to know, so that we can offer quality assistance..

Looks like LNB setup is wrong... should be set to Standard, LnB freq 11250
If you only have one LNB get rid of DiseqC setting, and any cabling/switch you have...cable direct to STB...polarity should be both...

I'm assuming you have a Standard LNB, legacy or equivalent...ALways give more detail than you think we need to know, so that we can offer quality assistance..

also, if u do a blind scan the epg wont operate correctly.
do a sat scan to get the epg to fill in.

J.S.

I just did a blind scan on my Pansat 2500A and got like 650 channels I did one on my Neusat 6000 and get about 250 so I did a TP scan on the Neusat and got 295 channels. none of these scans produced any of the PPV's nor my Denver locals. It's just weird that using the same dish gets such a big difference in channels recieved.

jack.. you're hijacking a thread.. very rude to do in here..
I will tell you this much.. you obviously have some settings wrong....

If you start a new thread.. and post *ALL* your antenna settings for that Neusat,you'll definitely get help...:yes:

I have 70% quality signal for EchoStar 8.10 bad went I scan the satellite on antenna setting y only get channels for EchoStar 1.3 Indus channels Asian channels and some orders from that continent I am new in this one of the channels say congratulation you are pointing to 148 orbital ? I don’t know if the problems are my antenna settings or something on the receiver. If any body can help my all I want is get EchoStar 8.10 i only have one dish 18" and standard lnb whit two connections.

If you are getting internationals and one of the channels says you are getting 148 then you probably are... you need to reaim your antenna back to the east 38 degrees... and as DJMBS told jackman14... you are hijacking someone else's thread you really need to start your own in the future...