Hi everyone
I have life time not ultra and i am not sure what its called classic or half panel it was working couple of month ago before new bin took place.Now i am trying to set it up but i am not able to load new bin i try many time but when i load bin after completing my receiver went blank thats mean no light on front panel then i have to flash and boot it again to bring it back and some times after downloading the file front panel light start running like knightrider. i am not able to fix it if some one can help me please.
Thanks

well, for starters, a bit more info would be helpful.. what bin did you try to load, what type of bins do you normally use in that box.?? Pansat 2500 clone.??

well, for starters, a bit more info would be helpful.. what bin did you try to load, what type of bins do you normally use in that box.?? Pansat 2500 clone.??

thank You for your time, Ok first when i power it it was dead no light on front panel then i load
boot-fta-60-1021-ver 04 that bring the light on in foram of knight rider then i load
life time (N) 040401-221-api its bring receiver at on display shows ON then i load three different bins one by one but nothing work
X-75bl-061011-259-tivo-fortec-4sec
Lifetime classic na-061115
lifetime-375 sua-xpa-x-xl--------------i try these three diffrent bins but not able to get it done.
Thanks

what were some of the recent bins you loaded that worked.. X75 is not a 2500 bin file.. sounds more like a 2300..??

the latest file for that box is a 261D ...did you try that one for your box..??

I'm also reading that when you load that latest file, the front panel lights DO NOT work.. do you remember reading that ..??? Seems that once you clone it to a Pansat 2300.. no more front-panel lights...

what were some of the recent bins you loaded that worked.. X75 is not a 2500 bin file.. sounds more like a 2300..??

Thnks onece again
I have life time ( not life time ultra ) it is not 2500 nor 2300. Unfortunatly i don't know about previus bins it was done by some other person who is not arround and I am sure he did not clone it.I did not find 261D that why i did not try it.
Thanks

























i
Thank again....

Here try THIS bin file, and disregard no front-panel lights.. just see if the receiver works at all..????

http://www.dsstester.com/details.php?file=1728

That box is a 2300 clone of Pansat

thanks onece again
I have life time ( not life time ultra ) it is not 2500 nor 2300. Unfortunatly i don't know about previus bins it was done by some other person who is not arround.
Thank again.... i may be wrong, i don't think there supporting the fortec lifetime anymore. but i did see something posted somewhere about converting it to pansat 2300. you can try looking around on the forums, or for about $169, you can purchase a much faster receiver, with less problems. <_<

Thank you I will give a try

i may be wrong, i don't think there supporting the fortec lifetime anymore. but i did see something posted somewhere about converting it to pansat 2300. you can try looking around on the forums, or for about $169, you can purchase a much faster receiver, with less problems. <_<

Here try THIS bin file, and disregard no front-panel lights.. just see if the receiver works at all..????

http://www.dsstester.com/details.php?file=1728

That box is a 2300 clone of Pansat

Thank You DJMBS, I got it work with the bin you reffer and as you said no front-panel lights.One more question is this bin auto rolls. thanks again for your help.

I honestly can't say if that bin autrorolls or not, since I haven't tested it.. if it does not, then I would suggest turning Autoroll OFF and manually entering keys until we can find a bin for you that DOES Autoroll...

Good Luck

where can I find the original boot and bin file for fortec lifetime pre_march converted to pansat 2300?