I have CW600S with system information
Model: cx_kround
h/w Ver: V1.00
s/w Ver: V1.27
Loader Vere: V2.50

I dont have a 'key menu" in "Accessories"
When i select Accessories it showes only
About STB
Games
Facility
Setup Wizard
Can sombody guid me how to get Key menu to chang the keys manually

I have CW600S with system information
Model: cx_kround
h/w Ver: V1.00
s/w Ver: V1.27
Loader Vere: V2.50

I dont have a 'key menu" in "Accessories"
When i select Accessories it showes only
About STB
Games
Facility
Setup Wizard
Can sombody guid me how to get Key menu to chang the keys manually

if you have already loaded the latest file for your box which is available at this site then you will need to enable the patch by pressing f1, 000, then when you enter the accessories menu you will then see the key menu.

I have CW600S with system information
Model: cx_kround
h/w Ver: V1.00
s/w Ver: V1.27
Loader Vere: V2.50

I dont have a 'key menu" in "Accessories"
When i select Accessories it showes only
About STB
Games
Facility
Setup Wizard
Can sombody guid me how to get Key menu to chang the keys manually

You have the current bin for the CW600S. Enable the patch as described in the previous post. Now you should have access to the Key Menu. Go into the System Setting Menu to access the OSD Menu. Once there, turn the Autoroll "on". The 1.27 bin has autorolled perfectly for everyone who has posted about it.
You can still enter keys manually, but I can't for the life of me understand why you'd want to mess with it. Autoroll kicks in anywhere from a few seconds to a few minutes. Enjoy!

f1 key is not working on cw600s any help

Hi raj123,

I had the same problem enabling the patch. It does work, only you need to hit F1 000 at the exact right time.

Turn the box on at the back of the box. It will say boot, it goes 123, 00:00 then 88:88, and right after it does the 8's, hit the F1 button, and the display should then show an H, then hit the 000 and then it should say patch enabled on your TV screen.

Hopes this helps.