I have a coolsat 6000 with the latest bin and my Satelite has a bracket with 110/119 setup! I have 97 percent signal and 95percent quality.
The issue I am having is in the top right corner a message indicating that I am on Sat 82 ! What I dont understand is how on both 110 and 119 in the menu am I picking up sat 82! I have two single eagle lnb 11.25 and discq switch setup correct! I am using one dish only and yes i am on 110 and 119.
When I setup my dish I tuned in on sat 110 and 119 fell into place but the
upper corner is saying sat 82. When I download channel plan they are for dishnet but I am getting the channels off 82 instead!
Any assistance would be great thanks!

read rule #6,then edit your post!!!

some additional info needed.

Do you only have one dish? Are your settings for the 110/119 set correctly meaning: Like, 119 plugged into LNB1 on switch, 110 going to LNB2, LNB freq 11250 etc..

Are you sure the dish IS pointed at 110/119, Do you have another reciever to verify this.

If you have more than one dish and one is pointed to 82, it sometimes it will state you found that sat in the upper right corner until you change transponders to any other and the message will update to the correct sat name.