Hi everyone,

I have 2 CaptiveWorks CW600s, I can't find the menu key in one of them.

The one I can see it in is under accessories. Can any one shed some light on this ? I want to enter the keys manually but can't find where.....

Thanks
Danielc1

menu;accesories;key menu
install v1.25 and the keys roll automatically
make sure you download the right one .there is one for premium and standard

Its not there.... I see it on one of my 2 receiver....

try 8282 it works for some of the other receivers

doesn't work with channel 8282... Why do I see it in one and not the other ??

do you have the same bin on both

Yes... this is strange !

I'm not that familiar with these receivers

is there a menu option that tells you the ROM version

Click lower rocker arm of pager,you will see present active key area such as index 80 or 90,click red button on remote to enter new keys. Use chan up or down to highlight alpa characters,click ok to enter desired letter and enter numbers thru your remote. Do not forget after completion to hightlight OK and click ok. PS pager will always show active key area!

I don't understand what you mean by 'click lower rocker arm of pager'....
What is the lower rocker arm ? and what is the pager ? Is the pager the remote control ?
I know how to enter the keys and stuff, its just that I can't get to the keys...

Thanks

I don't understand what you mean by 'click lower rocker arm of pager'....
What is the lower rocker arm ? and what is the pager ? Is the pager the remote control ?
I know how to enter the keys and stuff, its just that I can't get to the keys...

Thanks
he's referring to the "page" key on your remote... while watching, press page down.. it should bring up the key menu (or window) where u can edit keys.

I got it !!!

Thanks Guys! much appreciated1

if this helps , i had the same problem , i held dowm the f1 key on the remote , waited for a h to appear ,then punched in 3 zeros , that enabled the patch , then i could see keys under acc area !

Hi all
I need help for keys
I would like to enter key for BV.
I don't know how to enter,and what are the keys for local BV. can some one send the keys pls.
I have CW600s. new soft vs1.26.
Dishnet works fine.
Thx all

Read the rules for this site - we do not discuss northern provider here, there are plenty of other places for that.thx

http://forums.dsstester.com/vbb/announcement.php?f=90&a=1

If you are using the latest fix just press page down while watching dish and the active key will pop up and you can edit from there if you want. Same is true for bev. page down and bev key pops up. 80 refers to 00 key and 90 refers to 01 key.
Hope this helps:p

Hi all
I need help for keys
I would like to enter key for BV.
I don't know how to enter,and what are the keys for local BV. can some one send the keys pls.
I have CW600s. new soft vs1.26.
Dishnet works fine.
Thx all

The v1.26 bin is an autoroll file. No need to worry about keys. In the "System Settings" section of your menus, you will find an "Autoroll Notification" option, second from the bottom. Set it to "On". Then, when keys roll, the new keys will appear on a banner. If you want to wite them down, fine. But it's not necessary. Simply hit "OK". The banner will disappear, and a list of all channels available on the transponder you are looking at, may appear. The channel you're actually tuned to will be highlighted. You can change to another channel from there or simply exit the menu.