Ok I had this unit working with aux card a couple weeks back. Went back to the 510 pvr. Went to get the new keys last night with the Coolsat 6000 & now it will not see the sat's. The 510 works fine so I know the signal is good ! The Coolsat says no signal. I have had a CS 5000 in the past so I know the configuration on the LNB'S etc is correct. This is not my first Bar B Que. I read something about closed caption turned off but for the life of me can't find it ! Anyone else have this problem ? If so how did you correct it ?

Green button.

Well I downloaded a fresh 127 bin. Set the box back to factory with a flash. Then flashed the 127. All is up again. Thanks Maxsat.

Hi,

I am having problems with the 119 sat getting no signal

Just to clarify, do you mean you loaded the factory flash and reflashed unit, then applied the the 127 bin again

Do you first need to do a factory reset before applying the factory flash
Do you then do a reset and then apply the bin again?

I think I might need to do the same thing

Coolsat 6000 on Dish 500 with 110-119 going to 1 tv Using coolsat diseqc switch

thanks

You say your not getting the 119 bird....are you also not getting the 110 or Are you getting the 110 and just not the 119?

Sorry about that, I am getting the 110 sat perfectly

I did have to change the lnb freq to 11.200 instead of 11.250 to get 110 to come in.

119 is not coming in at all

thanks

Sounds like your dish may need to be adjusted. Are you sure you have the LNB'S set correctly for the 119 sat ? I had no signal on either sat. I think your having a different problem. Oh and yes I did do a factory reset after both flashes. Post back so others can learn.