NAwapoC.4.1d includes support to avoid the Dishnetwork electronic
counter-measure of 12 March 2002. Otherwise, it is identical to
the base NAwapoC.4.1.

Happy Testing,
ZappA :p

anyone test this yet?

i been runing over 24 hours ,, 100%
both on locked and unlocked recievers ;)

cheers, ZappA

I get a frame freeze once in a while.... once channel is switched up or down... it's fine.

Spiky

Could you please post instructions.

Thanks, TAZZ

Originally posted by tazz
Could you please post instructions.

Thanks, TAZZ

ok buddy this is how to
put the file in your jeepers dir.
open jeepers 207 select NAwapoC.4.1d, update keys
do a full monty and watch tv.
attached is a snapshot of directions.

Zappa,

Are you still running cammless after the latest ECM?

Thanks,

//Qoats

Originally posted by QuakerOats
Zappa,

Are you still running cammless after the latest ECM?

Thanks,

//Qoats


heya no i had to go to avr and rom10 =)
awaiting further camless adventures ;)

zappA i have a question about AVR with rom 10 am having problems i can not get it to work everyone says that it is up and running but no luck here
am using jeepers with mcg308 a true virgen rom10 never sub and no luck
am also tryint it on a ex/sub rom 10 and all i get is the previews and music channels and i know i have the right boxkeys for it cause i had this box working with a rom3 card before please help thanks

Originally posted by PERUCHO
zappA i have a question about AVR with rom 10 am having problems i can not get it to work everyone says that it is up and running but no luck here
am using jeepers with mcg308 a true virgen rom10 never sub and no luck
am also tryint it on a ex/sub rom 10 and all i get is the previews and music channels and i know i have the right boxkeys for it cause i had this box working with a rom3 card before please help thanks

heya email me at zappa@telus.net
maybe we can netmeet (windows netmeeting )
and i can fix your rom 10 to work
if so ,
please have the these things ready on your desktop.

a doc with box keys for your reciever,reciever #,and avr6 or 3 handy,rom 10 card,(programer if possable) and about 20 mins time,
i will try to help. cheers, ZappA ;)

here is the method i used....

How to activate a virgin rom10
Requirements:
-ird w/ known box key
-virgin rom2/3/10 cam
-Jeepers1.2.1 + an avr
-SorryShakes
-programmer

Instructions:
Box Key
-acquire the box key from the receiver (jkeys, tsop pull etc)

SorryShakes
-insert your virgin rom10 into your programmer
-ensure SS 'sees' the card
-enter the "BOXKEY CODE" command into the Command entry field (just cut and
paste the entire code)


BOXKEY CODE
:---------------------------------------------------------------------------
-----
21 00 53 A0 CA 00 00 4D 00 4B 00 01 02 EB A9 83 F0 6F 2E D3 09 0F 77 1B 03
DC 3D 9A FE 61 AF 10 6D D1 34 82 E3 40 A4 07 55 B6 13 77 DA 28 89 E6 4A AD
FB 5C B9 1D 80 CE 2F 8C F0 53 A1 02 5F C3 26 74 D5 32 96 F9 47 A8 05 69 CC
1A 7B D8 3C 9F ED 4E AB 0F 2C 05 A8
----------------------------------------------------------------------------
----

-click 'run CMD' and the first packet's response should be:

response to BOXKEY
CODE:-----------------------------------------------------------------------
---------
12 40 07 80 03 B1 01 02 90 00 F4 (Not always this exactly)
----------------------------------------------------------------------------
----

-now enter the next command - "PUBLIC KEY" into the SS command entry field:

PUBLIC KEY CODE
:---------------------------------------------------------------------------
-----
21 00 53 A0 CA 00 00 4D 00 4B 01 01 02 BE A5 10 AA 3A 53 53 E5 33 F2 2E 18
BC 74 18 74 A9 BE 3A F7 49 17 52 74 4B AB EB FB 37 6B 04 8A 0B 82 CF E4 85
10 CD 36 F8 46 BA 9E AD AF 98 0F D5 28 AE 63 11 20 1A AF 66 C7 A6 2D 70 26
7D C1 17 44 0D AC F5 4C C2 3C 05 B6
----------------------------------------------------------------------------
----

-click 'run CMD' and the second packet's response should be:

Response to PUBLIC KEY
CODE:-----------------------------------------------------------------------
---------
12 40 07 80 03 B1 01 04 90 00 F2 (Not always this exactly)
----------------------------------------------------------------------------
----


At this point the cam will now have this data:
-box key = 3B 1E F6 F0 B7 CD 67 5C
-key1 = D2 A7 83 73 36 05 DB 51
-IRD # F9 A2 2C 0B

Jeepers 1.2.1
-Plug in your avr into your lpt port and startup Jeepers
Enter this data:
(program) mcg308j

(network)= dish

(enabler type)= non-married sub

(cam)= dish network, public key = D2 A7 83 73 36 05 DB 51,check key1
(box key)= 3B 1E F6 F0 B7 CD 67 5C

(receiver)= from your ird
(cam id)= dish network cam id
(box key)= known box key from your ird

(board) avr3

(keys) -click 'get' to get them


Now click on the FULL MONTY button and enjoy. This should get it going. It
did for me .....
Thank you WW and StuntTeam .....