i prpgrammed a rom 102 and also the reciever ( 301 13) but now that i put the card in the reciever i only get the free channels not the others

i used the DP301_013 dish.fs script and then changed the ird ( to the one that is like 186) and the boxkey

did i do somethjing wrong ( it looks like it)

help please

Couple of things i can think of.
1) make sure your keys are up-to-date
2) is your software is up-t-date
3) are you using the latest blocker to rev.109

Questions
1) was the card an ex-subbed?
2) is the card married to the irds?
3) what did you do when you say you program the ird?

There's something about removing the SK's on either the card or the IRD with the 013. I am trying to find it as we speak. I just did an ex-sub and blank screen is all I get. Funny thing is tho ...reading in nagramaster, I have the idea key 86, and it did update properly, however the idea key 96 says it's blank, and after over an hour still never updated. Currently key 1 is the active key.

@ dicster:

Couple of things i can think of.
1) i don't know how to check if the keys are up to date but i am sure they are because the same card i used with my 2700( and i still use because the 301 13 is giving me black screen
2) the software is the latest ( P342)
3) no i didnt, i do the fast way of programming , in nagramaster , after unlocking the card i just write the bin file ( i think its something like rom102june21.bin )

Questions
1) yes the card was ex-subbed
2) yes i changed the ird # and the boxkey to the ones that work with all programmed cards ( Roo 186... and the box key was something like 8c...
3) i should have been more clear when i typed i mean as above, changing its ird and boxkey in flashedit ...

i hope that helps
thanx

Make sure you write a virgin eeprom than matches your ird build.

Black screen equates to wrong keys (can be any of the different type of keys).

If you are using the public fix for the card, then you need to remove the SK from the IRD.

You will need the SK removal tool for the 301-13, and FlashEdit.
After you apply the fix to the IRD bin, you need to fix the Checksum (CRC), by putting a checkmark in the box in FlashEdit.

Also use a virgin eeprom.

Alternative, is the find the public TSOP bin for the 301-13, P341_Single,No_RSA, which is already fixed. It will automatically update to the latest in the stream.