|
View Full Version : Help Programming Armulator lobogobo 06-29-2006, 02:05 PM Have new armulator and can't figure out how to program it. How do I create an eeprom from the file ROM102-REV109.bn102. Do I need to rename it to .bin, and what software do I need. Do I also need to change IRD & Box keys? vjcorona 06-29-2006, 02:41 PM You program your armulator with the program Armulator Edit. In the arms package you will find also the operation system the latest I heard is the .61, then the 102fullrom and the the public eeprom bin, or if you have a private one you can use that. node 06-29-2006, 06:38 PM three steps for this flash on the firmware *.ebin flash on the rom102full or 103 *.bin (use a same type bin as you flashed) flash on the eprom : rename the 102bn to bin and flash it as eep your box keys and tiers go in this one usually about 18kb node lobogobo 06-30-2006, 05:06 PM What box keys do I use and edit with what. (N2Edit ?) steamboat_947 06-30-2006, 05:26 PM Node can you elaborate on the- - - flash on the eprom : rename the 102bn to bin and flash it as eep--- part? I just dont get this part.I am in the same boat as lobogobo. lobogobo 07-01-2006, 08:21 AM I got my card done. Now just have to change my no's in my box. Thanks! eli2 07-01-2006, 02:46 PM "rom file not found" but can program eeprom with the same bin file. I have no idea what to do. Any sugestions? |