McClure5000
06-14-2006, 10:12 PM
I Am Running A Cw-600s Regular And I Have Just Updated To Kround And The Osd Is Working Perfectly Except For All The Channels Are Scrambled. When I Exit All Menus And Press F1 On The Remote, Nothing Happens. I Tried Factory Defaulting And That Fixed My Rebooting Problem But Still Can't Enable Patch. Any Advise Please. Thanks In Advance.
Model Id Cx_kround
H/w Ver V.1.00
S/w Ver V.1.15
Loader Ver V.1.10
sandpiper
06-15-2006, 09:12 AM
Did you rescan all your channels?
After the factory default I would double check the Installation on the LNB settings, enable the patch, and see what happens.
nco415
06-15-2006, 09:21 AM
try turning the unit off and on from the back switch.
McClure5000
06-15-2006, 10:22 AM
Problem fixed - : - Thanks for the help!!!:D
PARIS
07-01-2006, 10:18 AM
what did you do to ebable patch just get setup for colar adjust?
lsd1229
07-02-2006, 02:22 PM
Maybe I'm just a little slower catching on these days but my box says 600s but I need to enable patch. This thing is driving me to drink. All channels are scrambled. What am I diong wrong and if so what files do i need to use.
jefferylackey
07-02-2006, 05:58 PM
captiveworks cw600s is a good box. i've noticed that sometimes the patch will disable its self... just hit white button on remote till you see an H on the front display of the unit... then hit "000"...you will get a display on your screen that say's "patch enabled"... also, i've noticed that you don't always have to do a factory default....after loading the new bin....go into the satellite setup....if the sat numbers are all wrong the unit will reboot pretty soon... if it starts rebooting then you'll have to do a factory default....i've had several that after you load the new bin, it just works with no problems, no lost channels or anything... but some of the units aren't able to handle it as well and you need factory default. you'd think that all the units would be the same but they're not.
free1212
07-12-2006, 07:31 AM
The factory default just erases the channel lists, so when the tp's change, or they are making alot of changes in the channel line up, a factory reset, ie channel erase is a good idea to get the most channels out of your reciever with most all models.
PARIS
07-13-2006, 11:19 AM
bin file before youput 115 bin in if you did not patch wont enable