Does anyone know if there is a new bin file for the 6000? the reason I asked is that I have done everything, read every manual, and still my channels come up scrambled? Is anyone else having this problem? Here are the specifics of what I have done:

1) installed 6000 bin file: norw_120_20060323.stb
2) followed kuzco guide explicitly in installation
3) have a dual lnb satellite dish, connected both lnbs to the disesq switch and then to receiver, configured switches based on sat (nimiq 91) and sat 2 (nimiq 82).... but still says "satellite name" 91, when I config nimiq 2 82... this is a problem, right?? what can I do to resolve this issue? Here are the specs:

Satellite: 91.0W Nimiq 1,3
LNB Power: On
LNB Type: Legacy Twin LNB1
LNB Freq: 11.250
22KHZ: Off
Diseqc switch: 1.0
Comitted 1
Legacy SW Off

Satellite: 82.0W Nimiq 2
LNB Power: On
LNB Type: Legacy Twin LNB2
LNB Freq: 11.250
22KHZ: Off
Diseqc switch: 1.0
Comitted 2
Legacy SW Off

System Info:
My options and autoroll options are all on

Model: Coolsat 6000 premium
S/W Version: Norw-Ver 1.20p
H/W Version: 2.10
Boot Version: 2.10 (09:14)
Ch Version: E005

Pls let me know if there is any more info you need. Any help you can provide would be graciously appreciated. I also heard a rumor that the crew that makes the Norw firmware updates is no longer doing it and that this will be a problem in the future for coolsats, is this true? thanks for the help

6000 bin file: norw_120_20060323 is the later file was released.