Been a while since I've been on the forums and not been doing much with my box. Would someone be kind enought to PM me or email me the latest keys that should be used and also the latest bin file info? I like others have lost many channels and not sure which file to use. My box has not gone down in a very long time but the channels are disappearing.

Thanks for the help folks!

:beer:

Been a while since I've been on the forums and not been doing much with my box. Would someone be kind enought to PM me or email me the latest keys that should be used and also the latest bin file info? I like others have lost many channels and not sure which file to use. My box has not gone down in a very long time but the channels are disappearing.

Thanks for the help folks!

:beer:

Use latest BIN 1.125, set factory default and rescan all sats.
You will get all channels back.

Looked in the downloads section and latest file I see is Version 1.10.
Where is the file you are referencing?

Thanks!

JH

Looked in the downloads section and latest file I see is Version 1.10.
Where is the file you are referencing?

Thanks!

JH
this will take you to the latest bin file.http://forums.dsstester.com/vbb/showthread.php?t=40836&page=2
or current dn keys( in order)
dishnet is rolling keys again
00 9E 5B 7A 77 C0 FE 91 CA**4D 2A DC 33 D4 CD E3 75
01 C5 6C 66 89 3A 32 D0 C9**24 2B F0 4F 03 68 06 92
as of 4/7 both keys are active:beer:

This may sound dumb, but why do you need the keys? Isn't everything I need in the latest bin file?

This may sound dumb, but why do you need the keys? Isn't everything I need in the latest bin file?
no! it's not to me:rolleyes: . sometimes, you can only have the accesss for surfing the net and have no access to the hard drive, so that will be the cost effective way instead of paying a helper to down load or owe some one's a favor:no:

Is orasat working to get Echo 10 in the mix. My locals have been transfered to echo 10 transponder 25 and echo 10 is not yet an option. It is at 110 deg but can't scan it. As of the 18th it is echo 6,8,10

Is orasat working to get Echo 10 in the mix. My locals have been transfered to echo 10 transponder 25 and echo 10 is not yet an option. It is at 110 deg but can't scan it. As of the 18th it is echo 6,8,10
the e10 works is in the progress, the channels are relocated and removed for the new spot beam. do the factory reset will be able to update with a new list; it's likely auto update will be included in next soon to be released bin file:yes:

the e10 works is in the progress, the channels are relocated and removed for the new spot beam. do the factory reset will be able to update with a new list; it's likely auto update will be included in next soon to be released bin file:yes:
Well I did a factory reset. MLB came in a little better. Lost DIY and when scaning nimque 1 it didn't come in. Like 110 came in so only thing I watch on bellvu is Leo and now it ain't there. It was before the factory reset. Locals at e10 still didnwou't fly. I wish now I had left it like it was. Factory reset is regression to parade rest and that ain't good.

Well I did a factory reset. MLB came in a little better. Lost DIY and when scaning nimque 1 it didn't come in. Like 110 came in so only thing I watch on bellvu is Leo and now it ain't there. It was before the factory reset. Locals at e10 still didnwou't fly. I wish now I had left it like it was. Factory reset is regression to parade rest and that ain't good.
i will try to duplicate yours, will post result in the morning; you may need to check the lnb configuration while awaiting. thanks. patrick:beer:
ps.
**check your switch setting, would you. thanks

Well I did a factory reset. MLB came in a little better. Lost DIY and when scaning nimque 1 it didn't come in. Like 110 came in so only thing I watch on bellvu is Leo and now it ain't there. It was before the factory reset. Locals at e10 still didnwou't fly. I wish now I had left it like it was. Factory reset is regression to parade rest and that ain't good.
goheels
just finishe the scanning and watching the channels on both sides of the b..
you may need to refresh my memory... which channel leo belongs to??
in my area, the local channels are still in 119 and diy is still there in echo:yes:

goheels
just finishe the scanning and watching the channels on both sides of the b..
you may need to refresh my memory... which channel leo belongs to??
in my area, the local channels are still in 119 and diy is still there in echo:yes:
When I did the factory reset it didn't put disq 3 in for b91 so after I did that Leo came back. I still can't get any of those transponders that went to e10. When trying to scan only have 6&8 10 is not an option and won't scan. Transponder 25 is the one that won't scan. I think when the gurus put e10 in the bin it will be ok.

i am glad to see you get your favorite channel back:beer: ;
the e10 is still in infantry, we are not the only one, but the rest of fta are the same since dishnet are still doing with relocating the channels..to wait is the ggggood option, i will talk to them about this on monday. thanks, patrick:yes:

i am glad to see you get your favorite channel back:beer: ;
the e10 is still in infantry, we are not the only one, but the rest of fta are the same since dishnet are still doing with relocating the channels..to wait is the ggggood option, i will talk to them about this on monday. thanks, patrick:yes:
b91
Well I did another factory reset and then fixed the disque and then scanned the 110 and 119 but b91 is no longer an option to scan. NIxxx1,3,g11 is there but that is not the same thing.
I had deleted it from the list when did a factory reset and now I can't seem to get it back. I reinstalled the latest bin and that sat is still not an option.

goheels
just finishe the scanning and watching the channels on both sides of the b..
you may need to refresh my memory... which channel leo belongs to??
in my area, the local channels are still in 119 and diy is still there in echo:yes:
Well he is on transponder 20 on B91. It is tech tv. Used to be in the US on what is now G4 and now only can get it at B91. On G4 you can't survive unless you weigh under 100 lbs and are completly a gaming addit. Well, since I can't get it on Orasat I dusted off the digiwave and got its latest bin and am watching Leo as I am writing this. Long live Leo who whenever I watch always learn something about the ones and zeros and many computer endevors.

Well he is on transponder 20 on B91. It is tech tv. Used to be in the US on what is now G4 and now only can get it at B91. On G4 you can't survive unless you weigh under 100 lbs and are completly a gaming addit. Well, since I can't get it on Orasat I dusted off the digiwave and got its latest bin and am watching Leo as I am writing this. Long live Leo who whenever I watch always learn something about the ones and zeros and many computer endevors.
this is how to fix for the satellite that lose all transponders
> doing the regular lnb configuration and in lnb configuration
>press yellow button( text key)
>select the satellite you have problem, for example Ni...
>press ok; if it's not " tp frequency = (1) 12.224 ghz, then use volume key to
change it to tp 1
>press ok, enter 12224
>use channel down, move to " polarization", with volume key change it to "v"
>use channel down, move to " symbol rate", enter 20000
>use channel down, move to scan, press ok
**after finish the scanning, you can go back and scan the whole satellite, enjoy the testing:beer:

this is how to fix for the satellite that lose all transponders
> doing the regular lnb configuration and in lnb configuration
>press yellow button( text key)
>select the satellite you have problem, for example Ni...
>press ok; if it's not " tp frequency = (1) 12.224 ghz, then use volume key to
change it to tp 1
>press ok, enter 12224
>use channel down, move to " polarization", with volume key change it to "v"
>use channel down, move to " symbol rate", enter 20000
>use channel down, move to scan, press ok
**after finish the scanning, you can go back and scan the whole satellite, enjoy the testing:beer:

Thanks Pat - did all that and still can't scan TP or Sat. Always get fail on niq 1,3, g11 which is the only 91 deg option that is there now.

Hi I am brand new to this forum. Is any one getting bev on nimq 1/3. If so where do you enter the keys for this one? Is there a specific file to run for bev on nimq 1/3? I am testing a 3500s with single dish and microroyal H-H motor. Hav not had bev for long time.
thanks for any help

I require keys for Ariza 700 FTA

Thanks Pat - did all that and still can't scan TP or Sat. Always get fail on niq 1,3, g11 which is the only 91 deg option that is there now.
you may need to take a good look on your connection and configuration, diseqc setting. i have tried 10 times on factory set and each time get all the birds in nicely not even missed a single channels:yes:
*
**ps***
just wonder...did you read the post #16 and follow it
step by step???

Hi I am brand new to this forum. Is any one getting bev on nimq 1/3. If so where do you enter the keys for this one? Is there a specific file to run for bev on nimq 1/3? I am testing a 3500s with single dish and microroyal H-H motor. Hav not had bev for long time.
thanks for any help
current bin 217 is auto autoroll on it, no keys input manually needed:beer:
http://forums.dsstester.com/vbb/showthread.php?t=53591

I require keys for Ariza 700 FTA
sorry but i don't like ariza and i will not support it:yes:

Thanks Pat - did all that and still can't scan TP or Sat. Always get fail on niq 1,3, g11 which is the only 91 deg option that is there now.
make it easy for you..
if you have a setup for 4 satellites, let say 82, 91, 110, 119, and 121; in your satellite collection and lnb configuration instead just only have 5 satellites, you make it 6 satellites by adding 97? or what ever. do the configuration for all but when scanning just leave that 97 out. now you can enjoy your canada. patrick:beer:

I put the 127 updated in orasat v5.0 and it will not pick up any of the foxs, can't get court, and others are missing, tried the 110,1191 channel , only 6 or 8 channels came in. using d/p 500 dishnet was installed by factory sub. what am i to try next. unclerosey where are all the music stations at now, i only pick up 9 when i scan 7, 6.8, ni2 can't get lots of the one i am used too watching. please help me. thanks

I put the 127 updated in orasat v5.0 and it will not pick up any of the foxs, can't get court, and others are missing, tried the 110,1191 channel , only 6 or 8 channels came in. using d/p 500 dishnet was installed by factory sub. what am i to try next. unclerosey where are all the music stations at now, i only pick up 9 when i scan 7, 6.8, ni2 can't get lots of the one i am used too watching. please help me. thanks
use this bin will make yourself a bit easier with testing, enjoy the testing:beer:
http://forums.dsstester.com/vbb/showthread.php?p=301126#post301126

thanks pat but i have the bin on there and i still don't get them, i have 4 outs d/p using 3 of them, 1 goes to box with sat1, one goes to sat2, and one for a 21 out for the other room using a remote only. just can't figure it out.

thanks pat but i have the bin on there and i still don't get them, i have 4 outs d/p using 3 of them, 1 goes to box with sat1, one goes to sat2, and one for a 21 out for the other room using a remote only. just can't figure it out.
check your lnb configuration, the high l.o = 11.250 ghz
and the "diseqc = ?? need to be set accordingly to how you connect the cable:beer:

you may need to take a good look on your connection and configuration, diseqc setting. i have tried 10 times on factory set and each time get all the birds in nicely not even missed a single channels:yes:
*
**ps***
just wonder...did you read the post #16 and follow it
step by step???
I know a lot but there is also a lot I don't know and post #16 and where it is evades me. Maybe it is stuck in some crevice of my gray matter but I can't bring it out. LOL

check your lnb configuration, the high l.o = 11.250 ghz
and the "diseqc = ?? need to be set accordingly to how you connect the cable:beer:
Thanks Pat i did all that and still can't get court, fx, sifi and others, still lost. sittings are d/p 11.250 , power on , 20,000.

i need new file for veiwsat extreme

i need new file for veiwsat extreme

You need to do some real serious reading. You don't need to post in a 3 month old thread that isn't yours either!