C/P
Coolsat
How to change your password or see what it is.

Change Password if forgotten:

On the remote hit "Menu"
Sroll down to "System Settings"
Scroll over to the right.
When you get the password prompt enter "0103"
Scroll down to "Security Setting" and hit ok.
When you get the enter PIN again enter "0103"
Scroll down to Current Password and hit ok, Enter "0103"
Scroll down to New Password and enter whatever you would like.
Scroll down to Verify Password and enter the new password again.
Hit exit and select "Yes" to save.
Exit all the way out to picture.

Password changed without knowing your present password, cool huh!



How to see what the password is even if you didnt set it.

Turn OFF the reciever.
On the reciever hit the Power and Channel Up button at same time and release at the same time.
You will see after a second a screen labled "Diagnostic - V1.00" DO NOT MESS WITH OTHER THINGS IN THIS SCREEN.
You will see three lines vertical lines with 8 horizontal tabs.
Using the remote scroll over and down to get to the password tab which is on the far right 3rd up from the bottom.
If you hit ok on the Password tab it will show the password while you are holding the ok button down.
Now you can press power twice exiting out knowing what the password is.

This is also cool so that if your wife/husband set a password not telling you you can still find it out.


.
__________________