I have Flashed Chancy Ultra Pan 101t Boot Ver 6.0 Jan 12 206 12Hr clock Fix .Well it worked good for 2weeks and then it came up that I neaded New keys I got the new keys from you and I clicked CAS Control Menu and OK and SECA Clicked OK ,Down to KeyEMU turned off, then up to Viaccess1 Then do I put some New Keys in hear , I can 't get Viaccess2 to do nothing, or do I go down to Nagra 1/2. I Need some help in putting the new keys in I shure would like to have some help here. I THANK YOU SO MUCH Willard J Baird

Put the keys in Nagra 1/2
Be sure to verify that you have the right provider, look for "dish network" the provider should be 00 01.
Next cursor down to key number, click over until you see "Nagravision 2" in the top left corner.
After you have that, you can enter the first half of the key in the 00 key number above, and then enter the last half under the 01 key number above the key data.

Any questions ?

Ag

Put the keys in Nagra 1/2
Be sure to verify that you have the right provider, look for "dish network" the provider should be 00 01.
Next cursor down to key number, click over until you see "Nagravision 2" in the top left corner.
After you have that, you can enter the first half of the key in the 00 key number above, and then enter the last half under the 01 key number above the key data.

Any questions ?

Ag
I can get everything down to where you said Next cursor down to key, click over until you see "Nagravision 2" in the top left corner I still have "Nagravisiuon 1" in this left coner box . What can I do to get it to change to 2 Will it give me 2 lines to put in both sets of keys I have Key 86 whitch starts with 9E and ends with 375 Active. I SHURE WANT TO THANK YOU FOR HELPING ME Willard J Baird

There are three "boxes" on the screen for enterig the keys,
Top one "Provider ID" your either going to use 08 01 or 00 01.
Second one is "Key Number" it is going to show (or should) 00 and 01, but if you use the cursor "over" button it will give 2 sets of 00 and 01. This is where the name in the upper left corner of the screen changes to Nagravison 1 or 2.
The third box is "Key Data" and is where you but the key numbers into. The key is too long to fit in in one box, that is why it is key number 00 and 01.

Key 86 can go into the "00 01" provider ID and Key 96 can go into the "08 01" provider ID.

Hope this helps clear things up.

Ag

I can get everything down to where you said Next curor down to Key ,click over until you see "Nagravision 2" inthe top left coner box. What can I do to get it to change to 2 , Willit give me 2 lines to put in both sets of Keys , I have Key 86 whitch starts with 9E and ends with 375 Active. I SURE WANT TO THANK EVERYBODY FOR ALL THE HELP THAT THEY CAN GIVE ME
Willard J Baird

I don't get it you basically repeated your posts above.
Key number 00 is for the first half of the key, and 01 is the last half.

Use the cursor (arrow) buttons on the remote to navigate around the CAS menus.

If you still need help, post away.

Maybe this might help you. It is an old post but it might give you an idea on how to do it. Pictures are included.
http://forums.dsstester.com/vbb/showthread.php?p=270017#post270017

simply reflash your unit with the new 291t-apI(ntsc)new keys bin and you will be watching dennis play again

Hi everybody I want to thank you all .. YOU WERE ALL GREAT.
The Agent got Me Going . The trouble was I couldn't get the new keys in and turn Nigra vision 2 On Its working GREAT Now THANKS . Willard J Baird