Hi: Finally I could program my rom102 with the latest 3m, I flash a tsop to my 301-13 single chip.

But now my problem is that every 30 to 40 minutes the ird restart itself, and once again the window "adquiring satellite signal" and then "downloading guide" and finally works good, but after 30 to 40 minutes, the same... "adquiring satellite .................. :wacko:
And works fine again, another 30 minutes and once again reboot.... :mad:

I have search in post and found that could be the blocker, I'm using v16 but I've used v22sk and the same happen.

Any other suggestions about this ??

Thanks in advance

Hi: Finally I could program my rom102 with the latest 3m, I flash a tsop to my 301-13 single chip.

But now my problem is that every 30 to 40 minutes the ird restart itself, and once again the window "adquiring satellite signal" and then "downloading guide" and finally works good, but after 30 to 40 minutes, the same... "adquiring satellite .................. :wacko:
And works fine again, another 30 minutes and once again reboot.... :mad:

I have search in post and found that could be the blocker, I'm using v16 but I've used v22sk and the same happen.

Any other suggestions about this ??

Thanks in advance

There is a diff patch/ blocker for the 102 cards to work with the 301-13'. I am running one right now,,i will upload the bin later today that iam using if you can hang tough for the day. Or if someone has it that reads this,,iam just at a diff puter right now and will be back on mine later today.

Thanks Weedman, I will be waiting for your post later today.

I appreciate your help. If you can pm the file will be more helpful.

It is like weedman said it is a blocker issue. Just change your blocker to version 22 and you should be good to go. Thanks phantom

; BLOCKER V22 and BACKDOOR LOCK to 102
; USE N2EDIT BETA 7 OR HIGHER on cams
; USE N2EDIT BETA 7 ON 0801 CAMS, NOT BETA 5
; OR YOU WILL LOOP YOUR CAM!!
;
; THIS PATCH IS For
; 0001 rev 103 and/or
; 0801 rev 240
; cam should be cleaned to that level first
; then apply 3m, then this blocker last
; Penga

; BUG TABLE
$3170=40038800301001141E00801A80000095
$3180=999000008859807500812B80A0008AB3
$3190=80C80060DB8219000000000000000000

; Backdoor lock
$81B0=00004C4F434B20495320534554000000
$81C0=00425920383231452A2042454C4F5700
$81D0=00005448452041412042595445000000
$81E0=4F4E203D203036204F4646203D203033
$81F0=00000000000000000000000000000000
$8200=0000000000000000000000000000AA00
$8210=0000000000000000001763A1CA2606CC
$8220=60ECCC7D997180CD5AC08260017008AE
$8230=07D60DFAD1017026065A2AF59D2003CC
$8240=7A99A603B790A64BB76B1864CD7C1682
$8250=1E9001CC7A952050454E47412D4E3220

; YOUR password XXXXXXXXXXXXXXXX
$8260:AABBCCDDAABBCCDD

; V22 blocker - ROLLS KEYS
$9000=718089AE0FB692D1904027145A2AF69D
$9010=7100853F92A600CC55D39D9D9D9D9D9D
$9020=7100B692A1B1260220E8858700000000
$9030=00000000000000000000000000000000

; EMM TYPE to PASS area 9040-904F
; can be made to pass what ever Emms you want
; just add them below-
; 6000 IRD EMMS 42A1A2A3A4A5A6A7A8A9
;
$9040=42000000000000000000000000000000

; END

Thanks Phantom*1: As I said above I have use the v22sk, cause I've read that sk version was made for 301-13. :unsure:
Is this correct or am I wrong.?
What is the difference between the v22 and v22sk blocker?

Thanks for your reply. I appreciate your help.

Thanks Phantom*1: As I said above I have use the v22sk, cause I've read that sk version was made for 301-13. :unsure:
Is this correct or am I wrong.?
What is the difference between the v22 and v22sk blocker?

Thanks for your reply. I appreciate your help.

I am running 013 also with 102. Had rebooting problems. I started using blocker V16c. It is especially for the 013 rebooting problem. No problems since I started using it.
this blocker will work on all recievers, but the only one that will work as is on 301,013


here is blockers used so use at your own risk'

; BLOCKER V16c for 301.013 and BACKDOOR LOCK to 102
; USE N2EDIT BETA 7 OR HIGHER on cams
; USE N2EDIT BETA 7 ON 0801 CAMS, NOT BETA 5
; OR YOU WILL LOOP YOUR CAM!!
;
; THIS PATCH IS For
; 0001 rev 103 and/or
; 0801 rev 240
; cam should be cleaned to that level first
; then apply 3m, then this blocker last
; bug table is fixed!
; penga

; BUG TABLE
$3170=40038800301001141E00801A80000095
$3180=999000008859807500812B80A0008AB3
$3190=80C80060DB8219000000000000000000

; Backdoor lock
$81B0=00004C4F434B20495320534554000000
$81C0=00425920383231452A2042454C4F5700
$81D0=00005448452041412042595445000000
$81E0=4F4E203D203036204F4646203D203033
$81F0=00000000000000000000000000000000
$8200=0000000000000000000000000000AA00
$8210=0000000000000000001763A1CA2606CC
$8220=60ECCC7D997180CD5AC08260017008AE
$8230=07D60DFAD1017026065A2AF59D2003CC
$8240=7A99A603B790A64BB76B1864CD7C1682
$8250=1E9001CC7A952050454E47412D4E3220

; YOUR password XXXXXXXXXXXXXXXX
$8260:4545454545454545

; V16c for 301.013 irds blocker - ROLLS KEYS
$9000=898A90897180CD5AC091000B10207100
$9010=B692AE20D10B0F270A5A2AF885869085
$9020=B69287A600CC95790000000000000000

; EMM TYPE to NOT PASS area
; can be made to NOT pass what ever Emms you want
; Just add them below TO KILL THEM
; all EMMS THAT ARE NOT IN LIST PASS
$9100=B1000000000000000000000000000000
$9110=00000000000000000000000000000000

; END

I am running 013 also with 102. Had rebooting problems. I started using blocker V16c. It is especially for the 013 rebooting problem. No problems since I started using it.
this blocker will work on all recievers, but the only one that will work as is on 301,013


here is blockers used so use at your own risk'

; BLOCKER V16c for 301.013 and BACKDOOR LOCK to 102
; USE N2EDIT BETA 7 OR HIGHER on cams
; USE N2EDIT BETA 7 ON 0801 CAMS, NOT BETA 5
; OR YOU WILL LOOP YOUR CAM!!
;
; THIS PATCH IS For
; 0001 rev 103 and/or
; 0801 rev 240
; cam should be cleaned to that level first
; then apply 3m, then this blocker last
; bug table is fixed!
; penga

; BUG TABLE
$3170=40038800301001141E00801A80000095
$3180=999000008859807500812B80A0008AB3
$3190=80C80060DB8219000000000000000000

; Backdoor lock
$81B0=00004C4F434B20495320534554000000
$81C0=00425920383231452A2042454C4F5700
$81D0=00005448452041412042595445000000
$81E0=4F4E203D203036204F4646203D203033
$81F0=00000000000000000000000000000000
$8200=0000000000000000000000000000AA00
$8210=0000000000000000001763A1CA2606CC
$8220=60ECCC7D997180CD5AC08260017008AE
$8230=07D60DFAD1017026065A2AF59D2003CC
$8240=7A99A603B790A64BB76B1864CD7C1682
$8250=1E9001CC7A952050454E47412D4E3220

; YOUR password XXXXXXXXXXXXXXXX
$8260:4545454545454545

; V16c for 301.013 irds blocker - ROLLS KEYS
$9000=898A90897180CD5AC091000B10207100
$9010=B692AE20D10B0F270A5A2AF885869085
$9020=B69287A600CC95790000000000000000

; EMM TYPE to NOT PASS area
; can be made to NOT pass what ever Emms you want
; Just add them below TO KILL THEM
; all EMMS THAT ARE NOT IN LIST PASS
$9100=B1000000000000000000000000000000
$9110=00000000000000000000000000000000

; END


Yes that is the right blocker right there that bronco posted, thats what iam usingV16c
I can still upload the bin file if you need,,but patch that and your good to go:beer:

Thanks Bronco, Weedman & Phantom for your help.

I'm gonna try this blocker.

:beer: :beer: :beer:

V22sk blocker is used for the session key mod. The v22 is just a plain old blocker that I use on all my receivers. Thanks phantom