Hi!
I just bought a Pansat 3500. I had Dishnet set up at my house. I still have a subscription and it works. I tried connecting the pansat, used the pansat set up guide. Some transponders show 99% quality then dissapear? After using blind scan it finds a lot of channels but a lot of them show no signal.

I have Dishnet with 2 satellite dishes. The dishes are 1 at 110 and 119 and the other at 61.5.

Like I said I get signal 99% on ech9,8,6,7 and quality depends on the TP. Some have 0% some have 99% and some jump from 0 to 99%.

Could it be a switch or somthing?

My switches are set up:
110 and 119 on switch 1
and 61.5 on switch 2.
Thats the way my Dishnet reciever is set up.

I think you have 1 dish 500 (Poor Mans dish) with 2 LNB's for 110 & 119 on sw-21X and 2nd dish with 1 LNB for the 61.5 on sw-21 and all ok.Now put 1 sw-"DiSEqC-4".
And the settings:The 110 to #1 on the DiSEqC-4 the 119 to #2 on the DiSEqC-4 and the 61.5 to #3 on the DiSEqC-4."My works Fine".

So your saying I should replace the switches with a DiSEqC-4? I will try that as I bought the switch with the reciever, just havent changed it yet.

Hopefully, it will all work. Thank You for your response.
This is a great place.
Sorry Im a complete noob