:: N2Edit_Beta3b


here is a newer N2Edit_Beta3b little more features

New Features:
Apply Patch
Clean Codespace
Copy/Paste in EEPROM Editor

I have NOT tested this so be CAREFUL.

N2Edit v1 Beta 7
Fixed crash problem if card or image has more than 100 DataTypes (including the empty space entries).

This is a post from Protech-equip. I was an avid member of this forum until I decided to damage the community and these very forums in several ways. One of these was by spreading unfounded rumours and lies about the admin here. Another was be editting hundreds of posts I made here with some useless text. The ironic thing is that I actually made a lot of money selling various pirate devices through this very website.

I could have easily chosen to email the admin and ask him to zero out the IP's or even delete my account but decided I would damage the forums and talk shit about the people here instead.

I should be ashamed of this but am likely not.

[QUOTE=N2Edit]Here's the latest public release of N2Edit.. Lot's of improvements..

READ THE README..

v2.1 Alpha 1 (Private Release for testing)
* added new read/write routines for faster more stable communitcations

v2.1 Alpha 2 (Private Release for testing)
* Fixed restoring datapointer before restoring bug table
* Added SkipOTP to the settings

v2.1 Aplha 3 (Private Release for testing)
* Added ROm103 support
* Fixed some error checking
* Added ShowDumpinLog to settings
* Added simple D2C window
* Added Rom101 read support. (Still working on writting)
* Fixed Unlock Card function
* Prolly some other stuff i've forgotten

v2.1 Alpha 4 (Private Release for testing)
* Fixed some crashing problems when read timeout occurs (wrong comport, etc)
* Added ROM102 read capability via Loader/Unlooper when flashed with NDRS.

v2.2 Alpha 1 (Private Release for testing)
* Moved all I/O and Card routines to seperate dlls'. The DLLs are embedded in the exe.
* Super fast reading/writting. Works on Loader (NDRS flash) or ISO, directly on serial port or using a Serial/USB cable.
This is the fastest Card loading software on the planet!!!
* Fully supports all ROM102/ROM103. (No ROM101 support in this).
* Drag/Drop. Drag a bin file onto the app and it opens that bin file automatically.
* File->Settings dialog. Change commport w/o restarting app.
Most users can leave the delays set to 0.
Increase Byte Delay if you have trouble dumping
Increase CmdDelay if you have trouble writting.
Leave Show Dump in Log off unless you really need it. It slows it down.
* The app will check for new ads to download once a week IF connected. If not
connected, it should not ask you to connect.

v2.2 Aplha 2 (Private Release for testing)
* Disregard the last byte of last command... Written bytes are still verified. Fixed
* Switch to Msgs after DragDrop open... Fixed
* Error if not able to open comport in D2C... Fixed
* Patch Image has error of calling oRom.RenderCardImage... Fixed
* Error if Deleting DataType from DataTypes tab (CTRL-Delete)... Fixed
* Added Temporary Login. Will be removed after Alpha Testing is done.

V2.3 (Public Released)
* Fixed problem where patch with lowercase hex digi

Shark...why is the XP Atmel and NewdRS in with this?

I dont care much for the advertising with the program...but hey I guess they need to generate income...

[QUOTE=N2Edit]Here's the latest public release of N2Edit.. Lot's of improvements..

READ THE README..

v2.1 Alpha 1 (Private Release for testing)
* added new read/write routines for faster more stable communitcations

v2.1 Alpha 2 (Private Release for testing)
* Fixed restoring datapointer before restoring bug table
* Added SkipOTP to the settings

v2.1 Aplha 3 (Private Release for testing)
* Added ROm103 support
* Fixed some error checking
* Added ShowDumpinLog to settings
* Added simple D2C window
* Added Rom101 read support. (Still working on writting)
* Fixed Unlock Card function
* Prolly some other stuff i've forgotten

v2.1 Alpha 4 (Private Release for testing)
* Fixed some crashing problems when read timeout occurs (wrong comport, etc)
* Added ROM102 read capability via Loader/Unlooper when flashed with NDRS.

v2.2 Alpha 1 (Private Release for testing)
* Moved all I/O and Card routines to seperate dlls'. The DLLs are embedded in the exe.
* Super fast reading/writting. Works on Loader (NDRS flash) or ISO, directly on serial port or using a Serial/USB cable.
This is the fastest Card loading software on the planet!!!
* Fully supports all ROM102/ROM103. (No ROM101 support in this).
* Drag/Drop. Drag a bin file onto the app and it opens that bin file automatically.
* File->Settings dialog. Change commport w/o restarting app.
Most users can leave the delays set to 0.
Increase Byte Delay if you have trouble dumping
Increase CmdDelay if you have trouble writting.
Leave Show Dump in Log off unless you really need it. It slows it down.
* The app will check for new ads to download once a week IF connected. If not
connected, it should not ask you to connect.

v2.2 Aplha 2 (Private Release for testing)
* Disregard the last byte of last command... Written bytes are still verified. Fixed
* Switch to Msgs after DragDrop open... Fixed
* Error if not able to open comport in D2C... Fixed
* Patch Image has error of calling oRom.RenderCardImage... Fixed
* Error if Deleting DataType from DataTypes tab (CTRL-Delete)... Fixed
* Added Temporary Login. Will be removed after Alpha Testing is done.

V2.3 (Public Released)
* Fixed problem where patch with lowercase hex digi


damn,,this was private for all of 2 days,,LOL

chuck,

This it's what some peeps are saying it's for.
newdrs is for loaders. So flash your unlocker with that and test Nedit I'm pretty sure what it does. You will be able to use your unlocker to also read and write cards I guess.

Not saying that it will but test it I'm pretty sure it's for taht since if you look at Nedit settings there's a place for it

So, we'll still have to wait and see :yes:

[QUOTE=shark attack]


damn,,this was private for all of 2 days,,LOL

Rom10x released it Yesterday or Today...not sure.

Looks like someone put the flash for rebelserfs rev108 unlocker into the folder and forgot and zipped it up and sent it off...nowhere in readme does it say anything about working with an unlocker...

Yes....I see what you're saying.

The file was posted by N2edit, I wonder why he included what he included. This isseue has been raised in the original post for the file, I can't remember seeing anyone involved confirm or deny anything this far.

Looks like someone put the flash for rebelserfs rev108 unlocker into the folder and forgot and zipped it up and sent it off...nowhere in readme does it say anything about working with an unlocker...

No those flashes make your loader work with n2edit, iso's work as well. Just like Nagramaster.

Works for sure I just used my blue nexus to read and write 5 cards. it reads cards in like 3 seconds and writes them in like 8 sec. It is so fast.

No those flashes make your loader work with n2edit, iso's work as well. Just like Nagramaster.

Works for sure I just used my blue nexus to read and write 5 cards. it reads cards in like 3 seconds and writes them in like 8 sec. It is so fast.


You're right!!! Way faster than using the ISO to do the cards...just did one in seconds using the flash.

Things are looking up :D


I even forgot to flip the flashing switch back and change switches on my T911 before reading and programming...worked just fine

Good deal guys!!

Thanks for the update as I have not messed with yet. My card's working fine so why mess with it now...lol

I tried setting the loader to unlock mode and get ATR error...put it back in flash mode and it works great...just an FYI to anyone else testing this out.

C&P

Added extral program Launches. Create a shortcut in the n2edit forlder to another app, and it will show up under a "Programs" menu.

Fixed a bug that kept the ByteDelay from being used during the pre-read of the write procedure.

10813

N2Edit V2.52 brought to us by Space_Sifter



N2Edit 2.52

* Added toolbar buttons for Settings, Clean Codespace, Apply Patch, and About.
* Added Drag & Drop for patches. v2.2A1 added drag & drop for bins. Now you can
drag an .ep102 or .ep103 patch onto an open image and it will apply the patch to
that image. If you drage multiple patches onto an image at once, it will apply
them in alphabetical order. ex. Drag p3.ep102, p1.ep102 and p2.ep102 onto an image
in one drag and drop.. it will apply p1 first, then p2, then p3.
* Fixed a problem with downloading new sponser ads.
* Added a little error control in the D2C page..
* Added "Check For Updates" to File Menu. If a new version is available,
if will ask i you would like to download.

» Author: n2edit dtd. 15.07.2006
» Size 0.71 MB

v2.53
* Fixed bug that was keeping ROM102 images from being written. It was always
saying the image matched and would not write.

You can update this new version by going to "File" then "check for updates" on the N2Edit Toolbar.

This is a nagra2 utility work great from Humexico I found on another site very nice utility

Used latest version tonight...errored out writting to card and gave me unknown provider...got back in by writting clean bin to it. Tried it again and same thing.

Went back to V2.3 and all is good.

Just be careful

2.53 or whatever the latest update was....I deleted it from my comp

2.3 working fine. Thats what I went back to. Its kind of scary thinking you screwed a card with the prices like they are.

Lol

here is an update of n2edit v2.56
* Fixed some Editor issues
* Added Pasting of HEX bytse at cursor location.

Don,t know if it works any better than 2.55 used at your own risk.
:beer: :beer:

2.3 working fine. Thats what I went back to. Its kind of scary thinking you screwed a card with the prices like they are.

Hey Chuck, what are the differences between 2.3 and beta 9? Would like to hear from someone like yourself that has used both versions and plays with cards more then myself. As you say, with the price of cards I have been afraid to upgrade or try a different version.

beta9 I think is more stable than the higher versions. I prefer NagraEdit5.0 now that it has been released. The guys that worked on this are the ones that had the older version of NargeEdit that we all used with the older Rom cards. They also dont load up the program with advertising and links to sites to purchase stuff.

Chuck, I'm still using an older version. I don't see NagraEdit5.0. Please steer me in the right direction.....Hazzard

Here it is and I have uploaded the cleaning patch for the 102s..:hat:

http://forums.dsstester.com/vbb/showthread.php?t=61042

2.57 was released. Im using 2.53 atm should i start using 2.57?

where is the 2.57

where is the 2.57

Here ya go

http://forums.dsstester.com/vbb/showthread.php?t=62297

N2Edit v1 Beta 7
Fixed crash problem if card or image has more than 100 DataTypes (including the empty space entries).

Where is the N2Edit Beta9 everyone talking about?

Here you go...........

Found this tonight

v2.58
* Increased Serial Timeout to 1000 milliseconds. The default timeout was 500ms
but i discovered the card can delay up to 500 milliseconds to respond
to any given command. This does not have an effect on the Command Delay or
Byte Delay in the settings, nor will it make the app read/write slower.
* N2Edit no longer checks for new sponsor ads upon launch. It will only check
for new sponsor ads when you click "File->Check For Updates".
* The "Programs" is now "Programs & Scripts". It will list all .exe, .lnk
and .n2scr files that are located in the N2Edit folder.
* Added a new Scripting Engine. Files with an extension of .n2scr will be
treated as N2Edit scripts. N2edit scripts can be associated with N2Edit so
that double clicking will open N2Edit and run the script. N2Edit scripts can
be dragged to the N2Edit app. Or launched from the the "Programs & Scripts"
as noted above.
N2Edit Script Commands

Thanks N2Edit for your great work.. nice job and thanks from all testers.

n2-packets ROM10X MOD

I'm using N2Edit beta 9 and SCM SCR11 and trying to read ROM 102 card. Getting the ATR: Error (RX: Timeout) error message. Not sure what I'm doing wrong. I don't think card is unlocked - would I need something else to unlock the card? would appreciate any help. dying to see free tv...

Have this card reader----------
Reader supports All ISO 7816 -1, -2, -3 smart cards standards
Operates Single crystal at up to 14 Megahertz (MHz)
Powered by PS/2 pass through .No external power needed

hey wen i use any of the nagraedits and try to unlock my card it gives me Bad communications, try again.. can sumone help me please.. i ahve a unlcoked rom102 it wurkd before i jus got my own mikobo n2 unlocker and loader buh it gives me dat.. su mone please help

everytime I try to use n2edit. I get an error of cannot open com3. Can anyone tell me why..? I know my card is ok as I can access it on my bro computer but when I try on mine...it give me this error...please help

everytime I try to use n2edit. I get an error of cannot open com3. Can anyone tell me why..? I know my card is ok as I can access it on my bro computer but when I try on mine...it give me this error...please help

Have you changed the Com settings in N2Edit on your computer? Try Com 1.

Have you changed the Com settings in N2Edit on your computer? Try Com 1.
I have tried that too..N2edit works on my laptop but not on my pc. anything else I can try.? It says
opening Com 1
Com1 failed.

please help....

hi, i'm new to this. so my question is: do i use the 2.58 version or the beta 9? I was reading but I'm not sure which. Thank you :)

hi, i'm new to this. so my question is: do i use the 2.58 version or the beta 9? I was reading but I'm not sure which. Thank you :)
yo better use 2.57

yo better use 2.57

ok, but could you explain why?

hello all i have a problem with the com port with my computer. i have a hp laptop xp and using sp2 for my all in one loader reader unlooper and i tried its like t911 samething 6 dip switch and i can not get flashed.so i went to device manger and took the com port driver out and put a new one back still cant get it flashed and it atmel chip 902013 the other 4053 chip not sure the first chip number is right.i took it out it was the right chip my numberi type wrong please help thanks in advance:beer::beer:on me

hello all i have a problem with the com port with my computer. i have a hp laptop xp and using sp2 for my all in one loader reader unlooper and i tried its like t911 samething 6 dip switch and i can not get flashed.so i went to device manger and took the com port driver out and put a new one back still cant get it flashed and it atmel chip 902013 the other 4053 chip not sure the first chip number is right.i took it out it was the right chip my numberi type wrong please help thanks in advance:beer::beer:on me

using beta 3b. I keep getting error as follows: Rom 102 not supported

:no:old school hu programmer that needs help!