I have a coolsat 5000 and a superdish, however, when I go do a scan, it prompts for the type of dish, is this a single or a universal dish. Thanks

I have a coolsat 5000 and a superdish, however, when I go do a scan, it prompts for the type of dish, is this a single or a universal dish. Thanks
where did you get the bin from ???LOL , says nothing about a dish !! go look , go ahead !!! try ocs for the lnb , the superdish i believe uses pro a lnb:)

The super dish uses a Dishpro LNB for type. make sure you have 119 as #1 (left LNB if it's a 105 superdish), 110 as #2 (center lnb) and 105 as #3 (right lnb). If your using a Disq switch make sure you plug em in that way. If using the big square DP34 switch that came with it same thing and you have to use OUT TO REC port #1 to your box.

Thats it.

JD

The super dish uses a Dishpro LNB for type. make sure you have 119 as #1 (left LNB if it's a 105 superdish), 110 as #2 (center lnb) and 105 as #3 (right lnb). If your using a Disq switch make sure you plug em in that way. If using the big square DP34 switch that came with it same thing and you have to use OUT TO REC port #1 to your box.

Thats it.

JD

I was finally able to understand the instructions and getting all channels except on 121, i'm not getting any the following

"11768 H
tp 4

SR 20000
FEC 3/4"

but all the other channels on 121 are working fine

You have to convert the horizontal transponders to vertical. I think if you check Lyngsat you'll find you are missing all of the horizontal TP's.

Thanks everyone.

Everything is now working fine.

I would like to thank everyone on this board for your help. This was my first time experiencing the testing side. When I was told to set 119 as #1 (left LNB if it's a 105 superdish), 110 as #2 (center lnb) and 105 as #3 (right lnb) I was on the roof trying to figure this out. I guess I'm not the smartest person in this world. However, after 3 months of playing with the box settings and on the roof. I figured it out and now I feel like a total ass.

Once again thanks for all your help. Tonight when I have a nice cold beer, I will raise my glass to you all.

Hey bud...we've all been there. Everyone starts from scratch. The important thing though is thatyou figured out what needed to be done and got it done. Props to you!

Hi stadros316,

I also have a Coolsat 5K and a Superdish 121. I could not get signal from 121 at all. I can receive signals from 110 and 119 without any problem.

Is it true that if you can get signals from both 110 and 119, then the dish direction is correct, and you should also get signal from 121?

Can you post your settings?

Here is my setup:

1) Connect the single LNB on the right (when looking from behind of the dish) to DP34 port 2. This is for 110. Coolsat LNB type = OCS-DP.
2) Connect the middle LNB (part of the triangle LNB in the big plastic cover) to DP34 port1. This is for 119. Coolsat LNB type = OCS-DP.
3) Connect the left LNB (part of the triangle LNB in the big plastic cover) to DP34 port3. Coolsat LNB type = Universal.

Thanks,

bandgap112:no:

I have ck5 with superdish all lnb's are set on single focused on 105 110 & 119 . All work good.

You have to convert the horizontal transponders to vertical. I think if you check Lyngsat you'll find you are missing all of the horizontal TP's.


How to convert the horizontal transponders into vertical?

Thanks everyone.

Everything is now working fine.

Could you please let me know if you can get international channel, especially China and Taiwan channels from 119?

I have Pansat 2700, and think to buy Super Dish 121 for above reason.

thanks.

My set up like this w/o problem...

1) Connect the single LNB on the right (when looking from behind of the dish) to DP34 port 3. This is for 110. Coolsat LNB type = OCS-DP.
2) Connect the middle LNB (part of the triangle LNB in the big plastic cover) to DP34 port2. This is for 119. Coolsat LNB type = OCS-DP.
3) Connect the left LNB (part of the triangle LNB in the big plastic cover) to DP34 port1. This is for 121. Coolsat LNB type = Universal.

Good luck

Hi stadros316,

I also have a Coolsat 5K and a Superdish 121. I could not get signal from 121 at all. I can receive signals from 110 and 119 without any problem.

Is it true that if you can get signals from both 110 and 119, then the dish direction is correct, and you should also get signal from 121?

Can you post your settings?

Here is my setup:

1) Connect the single LNB on the right (when looking from behind of the dish) to DP34 port 2. This is for 110. Coolsat LNB type = OCS-DP.
2) Connect the middle LNB (part of the triangle LNB in the big plastic cover) to DP34 port1. This is for 119. Coolsat LNB type = OCS-DP.
3) Connect the left LNB (part of the triangle LNB in the big plastic cover) to DP34 port3. Coolsat LNB type = Universal.

Thanks,

bandgap112:no:

I have a dish pro dual lnb and i can't get 119

I sub with Dish and have a Superdish. Ports as follow as they installed:
port 1-105
port 2-110
port 3-119

My 119 is working, but my 110 is out, is there a problem with the LNB connection? I mean, everytime I go onto a channel that is in the 110 listing, The meter is in red:no: , but when I mess with the LNB power, ON->Off->ON, signal quality is back in the green, does anyone know of this problem?? any help will due, thank you! :sad:

where did you get the bin from ???LOL , says nothing about a dish !! go look , go ahead !!! try ocs for the lnb , the superdish i believe uses pro a lnb:)

Nice Megadeth Lyrics dude