Can someone guide me on how to program the ATL locals with Jeepers using an Atmega card? Currently I tried configuring them on Jeepers using tier1 and tier2 settings 0FB4 8000 / 10F4 1112 but I get only a few locals, not all. Do I have the correct tiers, missing tiers or doing something wrong? Again thanks to all of u for getting me up and running.

cheers,
:beer:

Jgonzale,

Try this:


Click “add 2 tears”.
In the first line enter :
From: 0000 to: 1EFF88000001011100000A13FC000005
In the second line enter :
From: 0000 to: 340013490000363800000548FF00FF00


Make sure you have the correct Blackout string for Atlanta and The correct Zip code entered in Jeepers.

Lemme know how it went.

It did not work, plus I lost some of my porn chnls when I tried that....

Can someone guide me on how to program the ATL locals with Jeepers using an Atmega card? Currently I tried configuring them on Jeepers using tier1 and tier2 settings 0FB4 8000 / 10F4 1112 but I get only a few locals, not all. Do I have the correct tiers, missing tiers or doing something wrong? Again thanks to all of u for getting me up and running.

cheers,
:beer:
I used 0534 0548 (min/max) in tier 1. for the blackout string I used 03.

I loaded them with the v9 pfg.

It only displayed 4 (four) channels in the guide but all of them were loaded in the 4 digit addresses.

The only locals I have been able to remap to two digit channels are the NY locals. These are the default locals imbedded in the original software by tomico.

That worked....thx so much for taken time to read and respond to my inquiry.....