Feel free to add any receivers that are missing.

PANSAT

Hit menu > Parent Control > second password > type 0000

Scroll down to Nagravision 2, hence not one....

Arrow down to where the 16 digits are and ignore 01 and 02, just go straight to the keys

Enter in the top row of keys (first 16 digits)

3D 73 19 22 27 5D C2 C9

then go to the line under that and enter the next 16 digits

97 96 5A 0C A5 79 27 F9

After that's done, hit OK twice (to make sure it's saved). You DONT have to hit "set default" because you guys did that before (hopefully). Exit out of everything and it should work.

If it doesnt work, try simple things like

> Changing the diseq settings, make sure your satellites are getting quality

> Are the keys correct, maybe you typed one wrong, it happens

> Did you save

> Do you have the latest bin (currently 261, available here)

Pansat Key Change with 123 bin and Higher
--------------------------------------------------

1. Press Menu button, then scroll down and Select Parental Controls goto 2nd PIN/enter 0000.

2. Scroll down to Nagravision 2, press OK.

3. On the Provider ID BOX, provider ID 0101,

4. Scroll down to KEY NUMBER BOX, you should have 00.

5. scroll down to KEY DATA BOX, enter the new N2 key00: 3D 73 19 22 27 5D C2 C9

6. scroll down to KEY DATA BOX, enter the new N2 key01: 97 96 5A 0C A5 79 27 F9

7. Confirm the N2 keys are correct, then press OK to save the new key. Then press EXIT a few times, and you will watching TV right away.

How To Manually Enter Keys For Viewsats:
--------------------------------------------------
Press Menu Button
Installation Selection ( #3 )
Code Selection ( #7 )
Nagra Selection ( #3 )
Dish Network
Always Leave The First Set Of Digits Alone ( 00 = First Row // 01 = Second Row )
There Should Only Be 8 Rows To Change For Active key If Needed ( A Total Of 16 Digits )
Change Keys If Neccesary On Active Key Or Where Necessary
Press Exit And Press Ok To Save Changes
Press Exit Button To Completely Exit Out Of Menu Options To Watch Tv .

How To Manually Enter Keys For Ariza:
---------------------------------------------
Press
1- Green button
2- Red button
3- Red button
4- Menu button
5- Press right arrow several times until you see nagravision
6- Now depend on the key that changed and it is active you must scroll down til proper key to be changed
Example: On 06/09/05 ECM key 01 is active. Scroll down to provider 000101 01 key line and enter xx xx xx xx xx xx xx xx (enter number with your # button in your remote and for letter follow code definition button on your TV screen)
7- Press OK for 5 seconds.
8- Exit,exit...........
9- Enjoy

DN active provider in ariza flash is 0101. so edit keys in 000101 lines
DN key 00 is in 3rd line from top to botton
Key 01 is in 4th line

How To Manually Enter Keys For Digiwave:
-------------------------------------------------
1- Press MENU
2- Scroll down to System Setting.
3- Press OK. If you see a red dot in the botton/left of your screen, go to step 5
4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins.
5- Press red button (audio).
6- Press right arrow until NAGRA appears in the first line.
7- Down arrow up to Provider and right arrow up to 0001.
8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00. Get keys from Maestra or another site or using a key grabber program
9-Scroll down to second key line, press ok. and enter key 01
10- Scroll To Save Key and
11- Press OK.

MRX1000

MENU
enter 9317
click blue button
scroll to Nagarvision
scroll down to #39 and #40
change keys to:3D 73 19 22 27 5D C2 C9 97 96 5A 0C A5 79 27 F9

exit and enjoy

MRX900/1200

MENU

enter 9521
click blue button
scroll to Nagarvision
scroll down to #39 and #40
change keys to
3D 73 19 22 27 5D C2 C9 97 96 5A 0C A5 79 27 F9

exit and enjoy

heres the link to what i posted yesterday on the subject !!

http://forums.dsstester.com/vbb/showpost.php?p=238572&postcount=1

bump to the top

thanks for the keys it works great for pansat 2700a

Well i tried all of the steps that you put down...and still am having no luck. I have a Pansat 2700...keys are all changed, went down on Dec 20th......any ideas ??

this will work for you:

Dishnet N2 keys

12-15-05
Idea Key 0:
AF 0C BD 48 D8 51 6D DC ...became ACTIVE 12-20
FE 44 D6 0C A3 6E 59 42

Idea Key 1:
3D 73 19 22 27 5D C2 C9
97 96 5A 0C A5 79 27 F9 ...was the ACTIVE key until 12-20


Globecast
00 0C A6 6D FF EF E9 4E C8
01 2A 93 49 EA A7 B9 15 EE .. N1 Keys????




Coolsat Slot 10 and 11 are for Idea Key 0 and Slot 20 and 21 are for Idea Key 1

Pansat key 00 for Idea Key 0 and Key 01 for Idea key 1

Viewsat line 08 and 09 for Idea Key 0 and lines 88 and 89 for Idea key 1

For Receivers with only two Key Slots, Enter Active Idea Key into 00 and 01
And next time for a fast response ,post yr threat at PANSAT' forum

Well i tried all of the steps that you put down...and still am having no luck. I have a Pansat 2700...keys are all changed, went down on Dec 20th......any ideas ??

There are many different ways of update N2 keys for Pansat receiver, upon the firmware( bin file) that in your box.

There is a new auto roll bin file that will roll the key for you Pansat Bin 140. Get it in Pansat file section

I have tried loading the keys for ariza 700 and they do not work. also the instructions are not quite correct. Any suggestions

Got it figured out. Had to read a little more. Thx

does anyone have step by step for blue jay2 I would apreciate it thanks

would anyone have the current key changes for coolsat clone - magasat 4000 pro....
this clone is driving me crazy!!!



(maybe its trying to tell me something....... go get a real fta box....lol)

would anyone have the current key changes for coolsat clone - magasat 4000 pro....
this clone is driving me crazy!!!



(maybe its trying to tell me something....... go get a real fta box....lol)
m75,
Look in the "Current Keys" Forum. There's a new one for today.:yes: As early as they changed, they'll probably change at least once more before the day's over!

:beer: :wow: :beer:

Back to lurk mode,
jr

ORASAT 5.0

Autoroll cannot be turned off. This procedure will allow you to enter keys, but if there is a Key change you will have to reenter if autoroll is not working

Enter 6969

Hit Blue Button for nagravision scroll down to line 9 (Providers name will be at the top of the screen) index 10 hit okay and it will bring up code entry screen


First key to enter in the code screen is the index key, 10 for 10, 20 for 20, etc

Scroll down to line 9 index 10 Using 0 keys enter the first 8 keys here then ok

Scroll down to line 10 index 20 enter the next 8 keys here then ok

Key 1 keys go in index 11 and 21

After entering keys exit out and Watch TV. Take your time and make sure the keys are correct


09-12-06 BIN 1.228

Code edit screen now shows keys. Edit lines have changed to numbers 29,30,31,32. If you need to enter keys for this bin they go here now. Older bins remain the same as above.

No. 29 is index 10 No. 30 is index 20 Key 0 Goes in these lines

No. 31 is index 11 N0. 32 is index 21 Key 1 Goes in these lines


ORASAT 3.0

Menu, Highlight options, 9999

Scroll to Key Manager, OK

Scroll to Nagra, OK

Scroll to Dish or other providers, OK

Key Index 00 is for Key 0 There are two lines for this code. 8 Keys per line

Key Index 01 is for Key 1 There are two lines for this code. 8 Keys per line

Scroll to first line hit OK, this brings up the keypad.

Enter keys, Hit OK

Go to next line enter the next set. Hit Ok, Exit out. Watch TV
__________________

for megasat 4000 pro boxes - coolsat clones enterning 8282 on the remote bring up key edit menu
and 4 numbered boxes appear at the top



sorry for the above post...(new keys)

would be nice if there was a coolsat one

Thanks man for the info...it is great.

i have viewsat extreme just got it im a noob.do i have to do this key change thing i dont use dishnet or does autoroll do it automatically. thanks.For the northern provider i use.

what is a keygrabber? if it works, how can I get one? thanks

what is a keygrabber? if it works, how can I get one? THERE ARE SEVERAL available in the "FILES FORUM" here on this site!! thanks

retrieves the "latest: keys that that particular website has grabbed from the datastream at that particular time. Most are current, but when there's a key change, websites get clogged and they don't necessarily get updated in a timely manner. If you're one of the first to get on before the traffic jam, and IF the keygrabber program at that site has had an opportunity to grab and change beforesaid traffic jam occurs, life is good! :yes:
Otherwise, you're SOL and have to wait like the masses for things to clear up. :no:
Patience is a virtue, and also key (pun intended!:p ) in this case!

Back to lurk mode,
jr

what about the coolsat 6000 premium how to change keys

coolsat 5000 keys never works even if i use 8282
please give me the way to do it....

for my pansat2700a i dont see the nagravision option under parental controls, all i get is option to enter an old pin, a new pin and confirm a new pin, pls. guide, thax

for my pansat2700a i dont see the nagravision option under parental controls, all i get is option to enter an old pin, a new pin and confirm a new pin, pls. guide, thax

What do you have on it for files? ( hit 'menu' and it should say on the screen)
Sounds like it is loaded with just factory settings and you will need to load the latest bin for your receiver from the file section. Should have 'second pin' as a fourth field. Go to the pansat section of the forum to read guides on programming.
Gl and happy testing :beer:

Where to find Keys for SonicView 8000HD. (I got new box SonicView 8000HD and trying to setit up.)

I appreciate the help.

Where to find Keys for SonicView 8000HD. (I got new box SonicView 8000HD and trying to setit up.)

I appreciate the help.

check the key thread
but if you turn autoroll on you won't need to enter keys

coolsat 5000 keys never works even if i use 8282
please give me the way to do it....

the coolsat 4000/5000/6000 is down right now .. the autoroll is working fine though so no need to enter keys .. we need a new bin

check the key thread
but if you turn autoroll on you won't need to enter keys

Please guide me - On SonicView 8000HD, how to set autoroll ON.

Thank You for helping.
Anand