Hi guys, I'm having serious problems getting this 310.10 up and running again. My TSOP's are zapped and I've been trying to use WALL to get them up so I can reprogram them. A couple of questions if anyone can help me here:

1. can i use a TSOP for the 310.10 from the TSOP bank here to get the box up and running? If so, do I take those TSOPs, put them into flashedit and put my OLD boxkeys and IRD number in? Or do I leave it as is, and put it on Flash1(22) and Flash2(23)? If a TSOP from here won't work, can someone please email me a working TSOP setup? I'd REALLY appreciate it.

2. if and when I get these two TSOPs running again and I'm off to try the N2 fix...I know I put my receivers build config into the N2 TSOP's, BUT....do I also put in my IRD number and MY boxkeys also...or do I leave them alone on that TSOP?

I've tried recusitating this darn thing for HOURS last night and still can't get the green light to come on. ANY detailed help would really be appreciated.

AND...

Happy Thanksgiving Guys! I hope everyone has a fun and safe holiday!!

Steve from NYC

What errors are you getting when jtagging.Is it recognizing receiver?You leave the boxkeys rec and cam numbers alone.Just your build config you chage.Have you tried plugging sat feed up and see if it powers up or updates.

never liked wall myself,,im a jkeys man all the way,,write your orig tsop back to the ird,,hope you saved it.

Thanks for the reply guys, ok...I got the receiver light to come on, then shut off. No Castaway, I don't have the original TSOP, that's why I asked if I can put another one on after I write down all the original IRD build info? So far, I have the original settings on the box, when I open JKeys, it shows up perfect just like it did originally. The problem is, the light comes on for like 2 seconds, then goes out. I read somewhere that this means that Flash2 can be rewritten. No matter what I do, the green light comes on then goes out. Can anyone give me a hand with this?

Steve from NYC

Hey Rainbow, When I hook up the jtag...it reads the receiver properly, gives me the IRD # and boxkeys that were original just fine. However, when I apply power to it, the green light comes on, sort of blinks for a second, then goes out. I'm at a loss here totally.

Steve

try a ecm fix on it,and see if stream will rewrite the tsops.

i get unknow device on my 301:010 with jkeys.

Hey Rainbow, When I hook up the jtag...it reads the receiver properly, gives me the IRD # and boxkeys that were original just fine. However, when I apply power to it, the green light comes on, sort of blinks for a second, then goes out. I'm at a loss here totally.

Steve
If jkeys sees it use it to program the tsops again.Erase 2 first and write it and than do same for 1.If it fails to let you flash it just keep trying,unpluging and try again.It will go if it is reading it.You might be able to hook it up to sat feed and it might update and fix itself also.

Icefalkon, my 301-010 did the same thing the light would come on and go out. But did not seem to power-up. I don't know if this will work for you but it did for me. Hook IRD up to the dish. Put card in. For some strange reason it came to life and there was TV.:beer:

my 301-010 did the same thing too. I thought it was goofed up. I plugged it in without the dish input and it cut off. I guess they have to have an input or they do not boot up.