i used the new bin when the key changed... ever since for some reason.... my locals will freeze then poof.... go to scrambled channel..... anyone have any ideas on what this could be..... dont have the problem with the ppv or the movie channels......... JUST the locals...........
PLEASE HELPPPPPPPPPPPPPPPPPPPPPPPPPPP
Thanks in advance...
and double thanks if ya know whats wrong lol
FTA 2 Day

i used the new bin when the key changed... ever since for some reason.... my locals will freeze then poof.... go to scrambled channel..... anyone have any ideas on what this could be..... dont have the problem with the ppv or the movie channels......... JUST the locals...........
PLEASE HELPPPPPPPPPPPPPPPPPPPPPPPPPPP
Thanks in advance...
and double thanks if ya know whats wrong lol
FTA 2 Day
my locals are great bro , look at the channel list i posted a few days ago
works sweet

ok i will try that.... the chan list i got works fine for anywhere from 2-4 minutes at max then......... POOF ...... its just like it disappears.....
Thanks brotha..... i appreciate it
:-)

Ok Skunker..... I Just now got change to load your list..... it was to the point... i had alotta chans that were comin up missing.... such as hallmark... and a few others in that neighborhood..... am scanning for chans as i type, when i first hooked it up... i had NO USA, when it was working right before the load,... so hopefully this blind scan will help.. will re-post to let ya know.

ok quick update......... in all this i lost USA channel........ any suggestions ????? AND lost my Louisville Kentucky locals....... gettin frusterated please ..... HELP SKUNKER HELP!!!!

ok quick update......... in all this i lost USA channel........ any suggestions ????? AND lost my Louisville Kentucky locals....... gettin frusterated please ..... HELP SKUNKER HELP!!!!
do they come up scrambled or black ??? open up the list that you d/l find what channels they are on and then tune to that channel and tell us whats on the screen , i just checked lyngsat and usa still stows on 12239 L // 105 sid //5666 vpid // i just looked at the list i think you d/l and i show the same
except converted for pro reads 13361 for pro lnb 25600 - 12239 = 13361
unless tp was changed since last nite because i think i watched something on the history channel same t/p ???

let me know ;)

bro c / p from the manual look for the t /p on your coolsat it will either be
12239 for the lagacy channel list or 13361 for the pro list
if you dont have this t/p add it and scan it
read below

good luck and reply your findings:)



Adding Transponders

Before going any further into adding transponders and the channels, you need to get your
information for the data to enter for transponder frequencies, polarities and the channel
data information. This can be done by using a previous channel list with the information
you need or by going to the Lyngsat Site on the net. Attached with this manual is a
“Quick Reference Guide to Lyngsat Packages” that will take you to the appropriate
Lyngsat page site with the information you need to enter tansponder and channel
information. It is best to copy it and print it out for your use. To add transponders, click
on satellite, and then click on “+T” or you may click on “Transponder” in the toolbar
and then click on “Add New” in the drop down window. Either way opens a transponder
setting window to the right where you will enter transponder number, frequency, symbol
rate and polarity. The polarity setting will give you the option of using Left and Right for
dss circular type lnbs or Vertical and Horizontal for fss linear type lnbs. Keep in mind,
all odd transponders are right or vertical and even number transponders are left or
horizontal in polarity.



To convert a Legacy type list to Dishpro

When entering transponders, input all right or vertical transponders as is and input all
left or horizontal transponders by changing the polarity from left or horizontal to right or


vertical and entering a new transponder frequency determined by subtracting the
frequency of the L/V transponder from the base address (usually 25600) and entering
that new number as the converted frequency. Thus changing the polarity of all L/V
transponders to that of a R/V transponder and entering the new frequency allows you to
use the stacking technology used by the Dishpro System. Note: Most satellites use a
base address of 25600 but some satellites use a different base address. Be sure to check
before doing a conversion. Attached is a conversion chart from Legacy to Dishpro for
110, 119 and 121 satellites at the end of this manual.



Deleting Transponders

Click on Satellite, click on the transponder you want to delete and click on “-T” or you
may click on “ Transponder” in the toolbar and then click on “Delete Selected” in the
drop down. You can delete more than one transponder by using the later option.



Adding Channels

To add channels, locate the info as to what satellite and transponder the channel appears
on from the lyngsat information. Click on satellite, click on transponder the channel is
located on. Click on “+P” in the toolbar and this will open the channel setting window
on the right. Enter the name of the channel (Hint: Enter Dish channel # in front of name
to make it easy to line up in Dish matching order later.), Service ID number (SID), PMT
PID is always 0x0021 for all Dish or 0x0020 for Bell Vu, PCR and Video PID (these are
same), Audio Pid and click on the “scrambled channel” box if signal is scrambled for the
channel. You can also enter alternate Audio Pids if desired. Be sure to check your
entries before hitting ok as the next time you view it, after saving, it will be in hex format.

i dont have FX and a few in that neighborhood..... and best i can tell transponders are right.... but there is ALOT i dont have now.....


"do they come up scrambled or black ??? open up the list that you d/l find what channels they are on and then tune to that channel and tell us whats on the screen , i just checked lyngsat and usa still stows on 12239 L // 105 sid //5666 vpid // "

Yes i have same info.... not sure whats goin on.... workin tween this and irds for charles, has me all confused...... not sure what to do.

i dont have FX and a few in that neighborhood..... and best i can tell transponders are right.... but there is ALOT i dont have now.....


"do they come up scrambled or black ??? open up the list that you d/l find what channels they are on and then tune to that channel and tell us whats on the screen , i just checked lyngsat and usa still stows on 12239 L // 105 sid //5666 vpid // "

Yes i have same info.... not sure whats goin on.... workin tween this and irds for charles, has me all confused...... not sure what to do.
what do you show for level / quality on 119 ? also go to channel /set favorite and sort by t /p ( one of the color buttons ) scroll to 12239 t/p if you have the legacy list or t/p 13361 if your useing the pro list, then select a channel ( will show all channels on that t/p ,scroll through them to see what comes on screen ( black or scrambled)
i think your useing the wrong channel list maybe for your set up if you have dishpro lnb use a dishpro channel list if useing legacy lnb's use legacy channel list !!
if all else fail's i would .............................................

reset to default !
load 134 , then updated channel list ( pro or legacy), then superbin,and re-scan( blind )

here is the list http://forums.dsstester.com/vbb/showpost.php?p=226179&postcount=1