this is how i hold the jtag to avoid damage to the box by lossing contact when holding by hand
http://img.photobucket.com/albums/v136/jaun1477/jtag-hold.jpg

never seen that method LOL !! what ever works i guess

LMAO...Is that a stack of $$$ holding the jtag :D

That why we're the #1 DSS site.:yes: we have solutions for everything:p :p :beer:

oh yeah

LMAO...Is that a stack of $$$ holding the jtag :D
it is
10 dlls worth in pesos :cool:

That why we're the #1 DSS site. we have solution so everything

I use a hands free method similar to these...I do it so I can still drink my :beer: and not have to worry about the hand holding the jtag slippping :yes:

I always just soldered mine on. Had one of those pogo pin types for a while and it works good too, but no where near as well as soldering. When soldering you for sure get a good connection.

I put a case of Boston lager on my JTAG. Works great. Never moves, unless I finish all the beer before JTAG complets read/write operations.

im going to use the shotgun method on my jtag,,the second one in 6 months died on me,,it will still do a 301 fine,,but once switch to the 2700,to 4900 side i dont get nothing,,dam im pissed.

im going to use the shotgun method on my jtag,,the second one in 6 months died on me,,it will still do a 301 fine,,but once switch to the 2700,to 4900 side i dont get nothing,,dam im pissed.
clean the contacts ??

can get it to work sometimes,,reads about half of the flash on a 4900,,then craps out,,then has DCU peek,,unplug ird,,plug back up,,and it wont detect anymore,,got it to work long enough last night to do a 2800 for the rom 10 deal,,but now,,nadda,,i dont understand at all.

ohh,,sorry for hijacking your thread EL.

no problem bud is all jtag related
i dont see any hijacking here
hope you can fix your problem

Here's how i do it on 301's,,Solding is the best way less hassle,,but the obove methods would work great. I use a pogo pin jtag for the 2700's they work great they clip right in don't have to hold it. Then on 301's or 501's i solder the pogo pin jtag on ,,it works great! But only thing is customers cring when they see me do this to there ird:lol:


<a href="http://img209.imageshack.us/my.php?image=dsc021108mx.jpg" target="_blank"><img src="http://img209.imageshack.us/img209/7852/dsc021108mx.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

Here's how i do it on 301's,,Solding is the best way less hassle,,but the obove methods would work great. I use a pogo pin jtag for the 2700's they work great they clip right in don't have to hold it. Then on 301's or 501's i solder the pogo pin jtag on ,,it works great! But only thing is customers cring when they see me do this to there ird:lol:


<a href="http://img209.imageshack.us/my.php?image=dsc021108mx.jpg" target="_blank"><img src="http://img209.imageshack.us/img209/7852/dsc021108mx.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
nice work weedman ! ever put one together for a coolsat ? hope i never have to jtag it but i know i'm going to sooner or later hpefully much later !
thanks for sharing your work bro !:)

Thanx skunker,,I have't yet had to do one for a coolsat yet but iam prepared:lol:

Thanx skunker,,I have't yet had to do one for a coolsat yet but iam prepared:lol:
bro do you have the "6 pin x 2 header" ?? if so i would buy one from you ( complete jtag for the coolsat for that matter if you put a few together i know they are in demand:beer:

Here's how i do it on 301's,,Solding is the best way less hassle,,but the obove methods would work great. I use a pogo pin jtag for the 2700's they work great they clip right in don't have to hold it. Then on 301's or 501's i solder the pogo pin jtag on ,,it works great! But only thing is customers cring when they see me do this to there ird:lol:


<a href="http://img209.imageshack.us/my.php?image=dsc021108mx.jpg" target="_blank"><img src="http://img209.imageshack.us/img209/7852/dsc021108mx.th.jpg" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>
Is this the picture of 301.013 jtag, I see only 5 pogo pins, what about the ground connection of the pad that goesto pin 18-25 of db25.

is on the left lower corner
i did mine so i can have the ground in the top row (all are ground)

This is a post from Protech-equip. I was an avid member of this forum until I decided to damage the community and these very forums in several ways. One of these was by spreading unfounded rumours and lies about the admin here. Another was be editting hundreds of posts I made here with some useless text. The ironic thing is that I actually made a lot of money selling various pirate devices through this very website.

I could have easily chosen to email the admin and ask him to zero out the IP's or even delete my account but decided I would damage the forums and talk shit about the people here instead.

I should be ashamed of this but am likely not.

Top side JTAG is best ....

Get a computer game port cable....cut one end off and connect them to your simple or buffer'ed JTAG ...the other ends has a 16-pin connector.

Solder header pins on top-side JTAG ..

This is a post from Protech-equip. I was an avid member of this forum until I decided to damage the community and these very forums in several ways. One of these was by spreading unfounded rumours and lies about the admin here. Another was be editting hundreds of posts I made here with some useless text. The ironic thing is that I actually made a lot of money selling various pirate devices through this very website.

I could have easily chosen to email the admin and ask him to zero out the IP's or even delete my account but decided I would damage the forums and talk shit about the people here instead.

I should be ashamed of this but am likely not.

Is this the picture of 301.013 jtag, I see only 5 pogo pins, what about the ground connection of the pad that goesto pin 18-25 of db25.

looks like buffered tag,,grond just clips on with alligator clip.