Google
Web forums.dsstester.com

View Full Version : pansat 3500S GUIDE


hlonipha
09-08-2005, 04:26 PM
Does anyone have a guide on the pansat 3500S like there are for the 2500 and so on. like what to use to load the new n2 bin and the channel list and where to get the channel list.

This guide would be very much appreciated

thanks

hlonipha
09-09-2005, 08:07 PM
wow nobody have any idea ?

hhtomcat
09-09-2005, 08:52 PM
Yeah seems very odd with no replies.. I would think it is simular or like the 2500A, but I would hate to BAKE one without knowing for sure! Come on guys, someone must have tried these 3500 Pansat units??? Maybe even rate them for us??
Thanks,
Tom Cat :beer: around...

hlonipha
09-10-2005, 04:44 PM
Yeah seems very odd with no replies.. I would think it is simular or like the 2500A, but I would hate to BAKE one without knowing for sure! Come on guys, someone must have tried these 3500 Pansat units??? Maybe even rate them for us??
Thanks,
Tom Cat :beer: around...
i got it if you need a little help let me know, i actually figure it out on my own after i ordered a coolsat in case i broke this one :mad:

but all is well and watching tv without the porn, although would like some info on getting the xtv card to work (do i need another dish or can i watch this card with the dish pointing to the same direction of charlie birds?

Mas
09-10-2005, 05:02 PM
When you said XTV card to work, most of the tester mean this XTV http://ads.dsstester.com/adclick.php?bannerid=47&zoneid=13&source=_blank&dest=http%3A%2F%2Fxtvcash.com%2Fhit.php%3Fs%3D1%26 p%3D4%26w%3D100351%26t%3D0%26c%3D110
or I am totally wrong :D

hlonipha
09-11-2005, 05:18 AM
yes same thing but in addition to their own receiver they have a card for fta receiver to get their programming. for those of us that have an fta receiver with a card slot in it we can use this card to watch this xxx channels but i would need a 33" dish to watch this programming :( I only have the charlie dish atm.

thanks

Mas
09-11-2005, 07:07 AM
yes same thing but in addition to their own receiver they have a card for fta receiver to get their programming. for those of us that have an fta receiver with a card slot in it we can use this card to watch this xxx channels but i would need a 33" dish to watch this programming :( I only have the charlie dish atm.

thanks

OK, I did some searched, and here is what I found, you will need 33' dish with Ku band LNB, and point it to Intelsat Americas 5 at 97.0°W

trock7
09-11-2005, 05:46 PM
what did you use to flash your 3500s - i tried =BlacklistX_05BL_LoaderV3[1].37 and i get flash update failed - im useing my same cable connection to flash my 2500 .

should i use that same utility-loader as the 2500 to flash my 3500 since this loader isnt doing it?

farmboy01
09-11-2005, 05:55 PM
what did you use to flash your 3500s - i tried =BlacklistX_05BL_LoaderV3[1].37 and i get flash update failed - im useing my same cable connection to flash my 2500 .

should i use that same utility-loader as the 2500 to flash my 3500 since this loader isnt doing it?
You have the right loader software, but the wrong cable. You need the null modem cable for the 3500S. here's the flash procedure. To successfully flash your box with the N2 bin, you need to see the "Knight Rider" on your box. To achieve this, start downloading the flash with the power to the box OFF and within a second or 2 turn the power back on [not the OFF switch --it needs to be the power in the back]

trock7
09-11-2005, 06:30 PM
soo i start the download first- then hit the power switch on back of ird in a sec or two . ? just soo ya know when i flick the switch i get no knight rider only a = 6-70 shows up then changes too =ON ,. thanks

farmboy01
09-11-2005, 06:35 PM
Then just go by time.

hhtomcat
09-21-2005, 04:28 AM
Well, as a freebie with my new Pansat 3500, I got this Red Delta irdeto access card. They have a website (nxworld.xxx) But lists no info for N America. I have an 8' Disk w K/U linier Lnb setup, did a scan and get two Free XTV from a scan on T5 K/U. With card in place etc, get "Scrambled or bad channel".. Black screen, no sound. Anyone get any better results?
Went to the website and seems Spain is in the center of the footprint for all the channels on a dif bird.. A tad over the hill for me to lock on! Don't think I want to move to Spain just yet!
So is anyone having any luck using this card with the T-5 bird? Or maybe I am on the wrong Satellite, but do get what appears to be 2 channels so??.. Maybe a wrong card or? Just a challange anyway, too much darn stuff to watch anyway!
Oh well, :cry:
Tom Cat

videobruce
09-21-2005, 07:23 AM
I hate to ask this, but if I update the f/w from Pansat, then flash the receiver with one of these 'bin' files, does that change or affect the f/w flash? The 5/05 version is there now. There is a 6/06 version on their site.

MetM
09-21-2005, 04:56 PM
Well, as a freebie with my new Pansat 3500, I got this Red Delta irdeto access card. They have a website (nxworld.xxx) But lists no info for N America. I have an 8' Disk w K/U linier Lnb setup, did a scan and get two Free XTV from a scan on T5 K/U. With card in place etc, get "Scrambled or bad channel".. Black screen, no sound. Anyone get any better results?
Went to the website and seems Spain is in the center of the footprint for all the channels on a dif bird.. A tad over the hill for me to lock on! Don't think I want to move to Spain just yet!
So is anyone having any luck using this card with the T-5 bird? Or maybe I am on the wrong Satellite, but do get what appears to be 2 channels so??.. Maybe a wrong card or? Just a challange anyway, too much darn stuff to watch anyway!
Oh well, :cry:
Tom Cat


I found a bin to make the Irdeto card works with the Pansat 3500S, I think now its only the "Conax" ones that work right away no? Someone?

hhtomcat
09-27-2005, 09:59 AM
I am drawing blanks and have not had time to pursue the workings of the Red Delta irdeto card much yet. (see my post above). If you are having luck, what bin are you using? Bird? etc.. And of coarse anyone else with input on this, JUMP right in!
Thanks
Tom Cat :beer:

mikekazim
12-24-2005, 10:45 PM
ya bro use the blacklist loader u can find in this site that will do it then change the keys to the new one