i don't care wether the card is marked or not. how can you reopen a 288-02, or a a2012

pleez help :(

Try using freetalk "x" command still works on rom3's only if it has been out of the stream since June............

What is the cards rev # ?

Well, ok let me start ranting abit...
Using the "X" cmd, which checks the backdoor of rom3 cards. In Feb, the
read/write hole to rom3 cards was initially closed. However, freetalk has been able to reopen this hole(after feb but before june), just take note that reopening of the card does come with a con, this is the mark you are talking about, the card will be marked at address $E051 when it is reopened with freetalk. Cards that have been marked here has been a target for the most recent ecm.
Now on june 21st,the hole was reclosed via new stream code. Therefore, Rom3
cards that have been in the stream since June, without blocker code,
are closed.. period. rom2 Cards with or without blocker code have never been closed
altho cards may be looped via ECM on July24th. :)

:D I forgot to add a few things :D

after hitting x in free talk if you get this message :
"Backdoor appears to exist but password incorrect". It appears your backdoor is still there and the card can be programmed.

If you get this:
"Backdoor is disabled, Caution - CAM may contain anti-tamper code updates"
then your card is locked and will need to be reopened. Don't try to dump the card yet!!!!!!
If you get that mesg, then you need to use "o" to open the cam.. If it opens your in, you can continue to dump the cam, if not :( ..