Running S/W ver. P230 on 3900 and have been changing the keys as needed with no problems for several months now. Today, after the key change got black screen only so inserted subscribed card to update the public key and then changed info on AVR so CAM was key 1, and still get black screen. I've tried 3 different AVR cards so doubt it's any of them, especially since I've been using all 3 alternatingly for months. So I'm wondering if my S/W version is too old now due to changes being made for the new cards on June 10th.

I'm having the very same problem on a 2800 which also has "old S/W" version.

Any ideas ?

Never mind .... it turns out that several of the sites, including this one did not have the 2nd key change posted which changed Key 0 to 20 8F 2C 9B 8B EA 0D A3.

k0=20 8F 2C 9B 8B EA 0D A3 active
k1=01 0D A7 91 20 52 96 EE
http://forums.dsstester.com/vbb/showthread.php?t=30986&page=3

how to update AVR with SUB or Ex-Sub.

Ok starting from the beginning
1. Put your sub card in IRD, till you get all video/sound. This will update you sub card, with a new active publick key. If Ex-Sub, wait till you get the Preview channel.

2. Open Jeeper, fill in all the information, with the later key:

For exsample:

KEY0 22 B7 05 6F C5 B2 47 4A Active

KEY1 44 D5 4A AC DE CB 77 A7

3. Put Key0: 22 B7 05 6F C5 B2 47 4A in the public key box, and mark DOT in Aux 0

4. Make sure all the information are correct, then full monty. When it complate, don't close the Jeeper yet, put card and avr together, then put in IRD, make sure it working, get all the channels(video/sound)

5. If it working then back to Jeeper Save the AVR configuration, and name it.

For next time when Bev changed the new key, all you have to do:

a) Open the Jeeper, load the Avr configuration you had save from #5.

b) update new key, Hit GET to to update with the new key. NOT NEED TO CHNAGE THE PUBLIC KEY, and hit write, and Watching TV.

*** PS *** If you put the sub card back in the IRD, then you have to change the public key.