|
View Full Version : sat 121 channel list for pansat 2500aw/gtools 846 03-19-2005, 07:10 AM can sat 121w be received on the pansat 2500a. if so is there a channel list i can use w/gtools to load sat 121w channels into my receiver.? thanks Mel42 03-19-2005, 09:00 AM Yes it can, but you will need at least a 30” dish with a linear Lnb. There are not many channel list around for the 121 so you are better off doing a sat scan. 846 03-19-2005, 10:07 AM When You Do A Sat Scan Does It Erase The Sats Already Programed In The Receiver ?? Mel42 03-19-2005, 10:21 AM No it will just add them to the end of your channel list. If you do not have any transponders loaded for 121 then do a Blind Scan, This will find all the transponders then scan them for channels. Good Luck! wildcatae 03-19-2005, 10:40 AM can sat 121w be received on the pansat 2500a. if so is there a channel list i can use w/gtools to load sat 121w channels into my receiver.? thanks Wingnut 101 has posted several list that include 110, 119, 121 in dishpro format. The Dishpro frequencies can be converted to conventional LNB frequencies easily in Channel Master. Send me a PM if you want to know where they are. Wildcatae Mas 03-19-2005, 10:51 AM Wingnut 101 has posted several list that include 110, 119, 121 in dishpro format. The Dishpro frequencies can be converted to conventional LNB frequencies easily in Channel Master. Send me a PM if you want to know where they are. Wildcatae Here is Channel Master (http://forums.dsstester.com/vbb/showthread.php?t=35331) |