anyone else?

just reflashed yesterday :mad:

153 again

i youst got ecm i have rom 10 and 3900 the second time i heard that there going to do it every day

pimp, is that hear/say or truth?...153 loc 00000001 atmeg 501

3700 with Atmega, twice in two days.

It only effects my receivers using the atmegas....receivers with cards keep on going :D

I like fixing the hits so a few minutes of my time for what I get overall isnt really that bad.

Everyday....I doubt it but they may be preparing for something :D More rumors...

anyone know which sec to erase on a 501?...tired of redoing the whole both of em

501.011 = SA52 = w/sw154(must select (2x2 tsops)
TSOP 2 prior to flash programming)
SA54 = w/sw165(must select
TSOP 2 prior to flash programming)

Does anyone know what they are targeting?

Yes a buddy of my say he got hit today.

It only effects my receivers using the atmegas....receivers with cards keep on going :D

I like fixing the hits so a few minutes of my time for what I get overall isnt really that bad.

Everyday....I doubt it but they may be preparing for something :D More rumors...

What is keeping your cards up? I've been hit the last 2 days.
:sad:

Yeap, I got hit too, this time my TSOP corrupted,

what does tsop corupted mean and could a ecm do that

not to rub it in but 496 is looking real good here on my tv lol no really i here that atmegas are the target today. This is all a setup for this weekend if you ask me.

Tomico, are you rubbing it in or "rubbing one out."

Are they hitting invalid cams & ppv strings?
Just got my 301-13 cemu working a few hours before the hit :^(

Tomico, you have a pm.

they are hitting the blocker ,silverman's checksum blocker has the up date for the rom3's only , he is working on the rom-10 as we speak,,

Bow

what does tsop corupted mean and could a ecm do that
Tsop being corrupt means that an ECM sent by charlie has damaged the files (or sectors therein) of ur IRD.
ECM, meaning Electronic CounterMeasure is Charlie's way of undoing our undoing of his doings ? got it ;) :lol:
So yes An ECM can do that......also if we keep erasing the entire TSOP unnecessarily something can go wrong just like that(o0omarko0o) when all is needed is to erase the corrupted sector & let it repair itself via the datastream. :yes:

All you have to do is to simulate rom10 or rom11 on your PFG file.
The data space still should be rom3 mode.
I have uploaded something you can test with.
In file section look for post “PFG Simulation rom10/11”

*Ok here it is:

This PFG file has no tiers. So:
Open your last good pfg file with internationals, locals, PPVs events and etc in notepad and select and copy all the tiers.

Open this new PFG file ( rom11 emulation) in notepad and paste all of your tiers you just copied.

Lunch jeepers and select rom11 in the network box in the upper-left corner.
Just edit your IRD #, Box keys, zip code and last 2 digits in the blackout box and voila!

You have all channels opened emulating rom11 with your Atmega128.

Up and running 2 hours so far.

Will keep you posted.


Try @ your own risk

Good luck.

anyone know which sec to erase on a 501?...tired of redoing the whole both of em
sa60 of flash 2 if at p223. But then that is where the actual ecm is located at. There are different areas that can be erased to correct for it.

i just had a 3000 with a rom3 come in. it must have the blocker on it. the card has a password on it and i have not tryed the right 1 yet.lol. i heard there is a password finder. is this true? if so does anyone have it or a list of good passwords? thx for all help and replies.

i just had a 3000 with a rom3 come in. it must have the blocker on it. the card has a password on it and i have not tryed the right 1 yet.lol. i heard there is a password finder. is this true? if so does anyone have it or a list of good passwords? thx for all help and replies.


What exactly does this have to do with ECM? That is the thread topic. If you have a question post it in the correct area...thanks.... :grr:

Knocked ya back a bit for not paying attention :D

I've seen no 2-5 action so I guess Charles is taking the day off. Prolly wait until around kick off for the foolsball game.

smooth sailing here db :D

oppss. i am sorry Chuck. thank you for reminding me. i clearly broke a rule and i understand your actions. i was so into it all that i forgot the rule. again i am sorry. this is still a great site and this is why. mods do their job. back to the subject... some say it is all atmegas getting hit. i had a rom10 go down 2 days straight. a rom3 model 3000 came in today that got hit thursday or friday. so was it the blocker or rom10 cam id's ? just trying to figure best way to go now. thx again Chuck for the reminder.

just got a call. 010 with atmega went down about 5pm today

The atmega will prolly have an issue until reloaded with proper code that will recognize and properly process the 0x51 op code. Same with most of the cardless setups. It seems that yvous was one of the few emu's that got around the new opcode. Hope it helps a bit.

So you are saying they did hit on 2-5-04? I hadn't seen anything on the ecm being restreamed today.

hi:
hit again today eastern time, anyone else? black sunday is here and uncle charlie also. :grr:

hi:
hit again today eastern time, anyone else? black sunday is here and uncle charlie also. :grr:

i got hit, so think i will leave ppv off for a while and see.use atmega

s2s, atmega has to be updated for the new 0x51 opcode. Removing the ppv on it prolly won't help you any. I haven't seen any posts other then 2 of you so I guess we'll have to see if it stays in stream for today or if they remove the ecm again like they have been.

I got hit using a ROM3. No PPV string. Just basic plus premiums. Noon Eastern time.

still running rom 10 full open youst waithing for the message your reciver has a serious error or somethingl ike that and 16 years old an im a tester is that rear

Got Hit at 11:00am usin 301-10 and atmega public fix

It`s still out there

Any word on rom 2? y have one just downt know if i should put it in the stream right now.


Hacktor.

Got Hit at 11:00am usin 301-10 and atmega public fix

It`s still out there

Any word on rom 2? y have one just downt know if i should put it in the stream right now.


Hacktor.

My Atmega got hit 12:00 noon east. My (ROM 2) everything open did not get hit with any of the latest ECM's.

I just pull my atmega out, just wait till the big game start

Form other site, many had reported that;

ECM has started again at 11:20 am EST.

Yvous 3.1 w/ Rom3 Image DOWN

Rom3 & Rom 10 with latest Gcsb down

atmega down again reseting ird now :huh:
cemu with 7100 wide open ppv's still going with the fix posted yesterday :yes:

what time does the game start

I'm still up and running with my Rom 3's and the updated Gcsb from friday. Got 3 sets up, all the same. I sure hope it stays that way. :hat:

rom 10 still rockn but other bedroom rom 10 hit. figure that out.

Two Rom 2's and 1 rom 10 wide open ppv and porn running fine here in Texas

501 loc 0000001 153...just reflashed and all good so far...can anyone recommend a good lock...something meant for the 501's?

hi:
hit again today eastern time, anyone else? black sunday is here and uncle charlie also. :grr:

black sunday had nothing to do with the super bowl...

just ask Hulk Hogan....

Been hit in Ohio around noon. Running an atmega on a 2800.

All still running here...atmega, two rom3s and one rom2 all in 301.010s, The receivers with the cards didnt get hit by any of the last few days hits.

ANyone have problem with Atmega try this one here http://forums.dsstester.com/vbb/showthread.php?t=34301 I reloaded atmega board after the 1st ECM and it still good, I only pull it out this afternoon when I found out there was an ECM, but I put back in hour and half now still OK.

i had 3 friends with 013's and atmegas go out around 11 am today est. all others i did yesterday with updated tcfd are running. my 010 with atmega has been turned on about 24 hours now with no problems. i dont know if it helped any but i stopped spoofing atmegas as rom10 for now and they are staying up as rom3. hope this info helps someone.

My receiver with the atmega went out again tonight...stuck a rom3 in for now...odd thing is my neighbor that is running the same exact PFG as I am hasnt gotten hit at all the past few days. He runs 2700s.

Similar here too, my 4900's with rom 3's and 10's never missed a beat, my 501's had locks installed but still had to be reset.....only down a few minutes.

I just got wacked again running 301-010 atmega around 1.30 ast

Jumbo

Same here 3700 with Atmege using the rom 10 spoofer.