i have a pansat 2500a and have d---n sub. with dp500 dish and dp34 switch. i have 4 irds hooked up to the subbed dp34. so, i want to hook up pansat to the sub and another dish to get bev.i have another dp500 dish laying around and want to get bev. do i need to loop another dp34 so i can hook up that dish to get bev? or do i need a different switch?thanks for any help

i have a pansat 2500a and have d---n sub. with dp500 dish and dp34 switch. i have 4 irds hooked up to the subbed dp34. so, i want to hook up pansat to the sub and another dish to get bev.i have another dp500 dish laying around and want to get bev. do i need to loop another dp34 so i can hook up that dish to get bev? or do i need a different switch?thanks for any help

Dude you need a DiSEqC switch. Only way to connect mutiple lnbs to one pansat. sw21 swithces wont work with fta. lots of information at dsshelper.com

i have a pansat 2500a and have d---n sub. with dp500 dish and dp34 switch. i have 4 irds hooked up to the subbed dp34. so, i want to hook up pansat to the sub and another dish to get bev.i have another dp500 dish laying around and want to get bev. do i need to loop another dp34 so i can hook up that dish to get bev? or do i need a different switch?thanks for any help

The DishPro500 LNB with a DP34 will work just fine, You will have to use a modified channel list with all horizontal TP's converted to vertical TP's.

The DishPro500 has a built in Disqc switch, you can run 2 Pansats with no external switch or add a DP34 and run 4 Pansats/Dish IRD's. You can also add a second DP34 to run 8 Pansats/Dish IRD's, anything more then that and you may need a DP-33 Launch Amplifier.

You can only connect 3 LNB's to the DP34, your switch setting in the Pansat install menu need to be:
input 1 = Disqc 1
input 2 = Disqc 2
input 3 = Disqc 3