good luck...

This works in winexplorer good luck!

Good luck!

Opens rom 3 and some others Good luck!

This does work!

Good luck!

Doeas anyone have a guide or Know the glitch settings for this Program

' Dish A21 Opener
' Credit where credit is due
' Thanks Penga, H00k, and many others.
' Thanks to #echostar on uicn.net
' Thanks to CC for keeping the info free
' script by A.Friend
' use a dish programmer

1. First flash your LOADER with the sorry nagra 2004 flash.

2. open Up Sorry Nagra 2004 Final

3. Copy The Serial key given by sorry nagra 2004

4. open up the Server Keygen

5. open Up Internet Explorer and go to /http://127.0.0.1:21000

6. paste your Serial Key in the box provided.

7. Copy the Unlock Key Generated From That Web page into sorry nagra 2004 final and voila your unlocker should be ready to rock and roll.

DISH ONLY Rom 3 Rev 382 Unlocker
' Note cam will be OTP marked at E010 AND E011 AND E013.
' Only run this script once look for 9000 responces to commands.
' Thanks to dish for all marks and emms to cam.
' Make sure to put a good blocker on cam after or you'll loop it.

Have fun testing

You will need a dish programmer
Says it will will open any Rom 10
Also if you have a card that is opened but for some reason you cannot write or read you can try the following

RESET than REPARAR.

IT WILL ONLY OPEN ROM 10 CARDS BUT IT WILL ALSO REPAIR ROM 11 CARDS THAT HAVE PROBLEMS IT WILL NOT OPEN ROM 11 CARDS CLOSED BY THE PROVIDER.

unzip and put this in your windows system folder that should help
are try the vbrun60 please someone correct me if I'm wrong

Here is the rom3 no marks unlocker without all the Copy and Pasteing.

This does work I tested it a couple times I also put a 382 bin that will lock your card if your bored and would like to play use dish programmer

1--Open viagra,
2--click the card tab,
3--then click on the little blue folder on top
pick--DPO's381&382 NO MARKS DISH&BEV
4--open port
5--click rest
6--double click the 000 cammand then hit reset,
7--then double click the 001 command until you see 12 40 02 6F 00 3F response,
8--then double click the 002 command until you get I/O error at the bottom of viagra
9--click reset
10--close port
you card should be open

I had lots of errors last nite with this until I shut down some of the programs running on my computer.Hope this helps







All Credits Go To ATLAS!!!!!!!!!

THANK HIM FOR EVERYTHING

JUST MADE EZ BY DPO ;)

ENJOY!!!!!!!

This was newlyupdated by Menthol

I found the file...here it is HAPPY TESTING

This is for rom10 got everyone maded in this package so that doubles the odds good luck.....rep rep rep lol

ok this comes with a flash for your hu loader unloops and repairs rom2 I ran this winexplore and it runs with the flash fine make sure its set for unlooping!
I didnt use it on a rom2 but it was working with a rom card in loader so mostly it will work!

If you have BD0-BD3 screwed up [because of unlocking etc. This might help has read me for info......

Now if they only had a RevA23. Use in Nagra........

Work in :D progress so use at your on risk as always

This is a great program might be only one you will ever need! Run this in Nagra 4.1 its a d2c program. This opens any rom3 under 382 enjoy!!!

Suppose to open rom3 rev372 up to 378

This has worked for me in the past for those rom10's that cannot catch the bd3. Good luck. Sorry it is in spanish, just hit rest then reparar.

how about this in english version

use a dtv loader and SN2004 flash it should be here somewhere good luck
THE CREDIT FOR THIS LITTLE APP. GOES TO THE

POWERGROUP2000 MAY YOU REST IN PEACE.

If you post this on other sites please copy and paste this post.

/\tr3f0000

thanks guys for keeping it public and free now sit back and what for charlies next move lol

I see this file is posted twice I tried to delete this post but I dont have the option and was going to put this flash with newbie09 thread but its locked so heres the flash and the complete kit
you need to put the sn20041 rom11 unlocker in the same folder as the complete kit. All files need to be in same folder. Then you should be good to go. Also XP or 2000 are the only operating systems this will work on. Oh yea got to have net framework too. Enjoy

put everything in the same folder as sn2004 and it should work
also install framework 1.1 from microsoft, don't use on win98:D

I found this and it worked for me.... But I was a stupid head and used the no64 with pw. Now I can't get back in. But I was able to unlock my rev 375, the one that said that it was anti-tamper. Hope this helps. Use the NE to in the Comm tab.

This will update to card to a rev 382. Just DON'T USE THE Penga blocker w/ pass. :no: NO NO NO NO NO!! That is what I did to mess my card up to the 383.

Hope someone else can use this file.

I forgot to tell y'all to rename the file to rom 3 unlocker.d2c. Someone might have gotten confused by me doing this, but I didn't want to zip the file and Thought this would be easier.... blah blah blah..... I am starting to hear myself talk.

rom3 softunlooper2-unlocker

--------------------------------------------------------------------------------

read the txt file. use the new hex from zip for loader for this opener not the one from softunlooper. they are different. this is mostley an unlocker. it will do most blockered cams. and most any rom3. sept a stream locked one. good luck. and there is nothing wrong with soft unlooper. this and that do different things. if you locked yourself out of a cam, this is for you. if it is dealer locked, this is for you. the settings for winexplorer are in the zip. and the loader writer program are in it too.

the file is for standard loader, not a modded one.

org. posted by Penga

Did a search and didnt see this here but it may be under another name...great 381 unlocker..........

credit to buzz
credit to echoloader
credit to s1

This one is more an unlocker, can unloop a softloop too. will unlock almost anything including no64-7. except stream locked cams. not for cams that dont respond with atr. and it is probly best to use nagraedit 2.0 to check if cam is open. seems to loggin better on rom 3 than nagraedit 3 or 4.

using the hex from softunlooper2 this is for really f'ed soft loops. if this dont open it then it is ice-scraper. or it needs hard unlooping. this is not an unlocking script, only use on a soft looped cam. it will run for a long time. I suggest not running over 24 hours. let run overnight if need be. but if it is still closed, then its DOA.

Thank penga69

This works on rom10 cams that get bd3 00 00 00 00 00 00 in nagraedit4.1, and if you lost the PW

More information in the read file

Viagra Unlocker for rom10-rom11
have not tested please post results use dish programmer

Fix your Rom11 Backdoor

--------------------------------------------------------------------------------

-I fixed Two Rom11 Cards.

Run the MromV6
-Step One: Delay 100-20-100 Click on REPARAR
-Step Two: Delay 150-20-150 Click on REPARAR
-Step Three:Run this D2C with NE4.1
-Step Four:Write Clean Bin To Card NE4.1

P/S:
-After Step Three do not do ONE STEP CLEAN you need to write a Clean Bin to the card first

-If the first Option dont work try this one
-Tested and works
-You can fix other Problems with your Rom11

-Step One: Open Mrom6
-Step Two:Reset Card
-Step Three:Abrir Cartao You will change your Provider to 40
-Step Four: Delay 150 20 150 Click on REPARAR
-Step Five:Write Clean Bin to Card NE4.1


-Not tested but Option Two should work for Rom10 Try at your own risk
use dish programmer

Try this at your own risk. No promises made

Rom 11 bo7 bo8

it updates any rom3 Rev372 and up to the Rev of 381

' Rom 10- A23 & A21 Opener unlock dealer pas
' Credit where credit is due
' Thanks Penga, H00k, and many others.
' Thanks to #echostar on uicn.net
' Thanks to CC for keeping the info free
' thanks pocket setting

use it with winexplorer 5... to open rom10 revA23 closed by passwords...

thanks pocket!!!


I have not tested yet but looks like you need a dish programmer
not sure if it will work on stream locked cards so post some feedback

Used dish programmer. May have been a fluke or just a one time deal but the program unlocked a stream locked rom10 at a23. Do not know about marking the cam haven't checked the eeprom dump yet. Just passing on the results of my test. Thanks phantom

what were your setting for win exp??

what were your setting for win exp??

I was using windows explorer 5.0 standard settings for dish network com1 did not change anything. Ran the proggy one time then checked in Nagraedit 4.1 and the card is open.

not sure if I have a stream locked or password protected reva23, but ran this program a few times, it said that card was unlocked, but nagra couldn't log into card. still says backdoor reported disable-card may contain update thanks for the file though, will try it on another card and post findings This is why they call it testing........

Use this program to unlock "OTHER" Provider's rom11's at B09 or under (Mainly European companies).

I tested it on NTL rom11 B08 cards. Worked like a charm. Some say it takes a little tinkering. "How To" is included in ZIP.

'Dish Rom3 Rev382 Updater-Unlocker Script
'This script updates Rev372 to Rev382.
'So any revision below Rev383 can be opened easily.
'When complete the backdoor should be open.
'Works with dish iso at 3.68
'Many thanks to all that have shared their knowledge.
'Enjoy :)

tried to can't do any ntl ? what am i doing wrong?

Bunch of d2c files to try with nagra 4.1 some unlockers some are suppose to repair backdoors
use nagra edit 4.1 go to comm tab the open d2c file that you need then hit send


good luck

I know its here somewhere...Posted by request.....if its a duplicate I will delete it. Great Rev381 unlocker....

I think all the unlocker or rom opener file are in here. Ctech and I have moved all them here http://forums.dsstester.com/vbb/showthread.php?t=29863

We can move it in a little while :D

Anyone got luck to open rom 3 rev 383 using this file. Please post your response. As I don't have rom 3 to play with. Just want to know.

Thanks

You need to use a modded loader to unlock the Rom3 Rev383 and the Rom10 Rev A23....lots of info about it here in the forums......

dish rom3 378-380-381 iso unlocker

dont know if all ready posted but if it is just remove it :D

'BD0 Retriever
'by slickvguy (Also the developer of VCC Analyzer!!!)

'Backdoor0 key retrieval for DN provider via CMD03 overflow
:yes:

this is supposed to unlock cards that u dont have the password for.. not for stream locked cards.. i had no luck but i am still playin with diff settings seein how there was no read me included.. if anyone has any luck please reply with details. thanks


ps if all ready post please remove

'BD0 Retriever
'by slickvguy (Also the developer of VCC Analyzer!!!)

'Backdoor0 key retrieval for DN provider via CMD03 overflow
:yes:
works for 10, does not for 11....

This will find that BDO lock.It works like a charm


its not mine found on mill page


ps if all ready posted please remove

thanks worked on my rom 10 but its marked at 039 and009 that sucks

Tried one of my rom3s that I screwed up password on...all I get is

BDO: 00 00 00 00 00 00 00 00

Nice tool for someone though...thanks for bringing it to us :D

Finally ROM 10 A21 UNLOCKED


--------------------------------------------------------------------------------

To all plastic users/tester.. I unlocked 7 Rom 10 A21 in about 10 minute.. and this realy works. download the xvb file and put it in winexp50 samples folder.
1. Start winexp50 go to File open (recently downloaded xvb file)
2. Go To card menu
3. Execute the script

once finish

1. Open nagra edit
2. Read the card from card menu.

That's it.. do what ever you wan't to do with your open card.. Good luck..

Winexp50:
Go To download section and than into Dave TV Files on second page you will find Winexplorer 5.0 just download it and do as i said..

thxs to the creator ...dNh_301,COA1

' New VB Script File - Created 01/16/05
' FOR NTL rom 10 A82 rev STREAMLOCKED only.
' AUTOMATIC SCRIPT
' USES Newd11.hex on LOADER only!!!!!!!!!!

this program works well to unlock and unloope rom 10 cards

this will fix your locked rom 3

open the back door on Rom3 Rev372

A3d opener