Suppose to be check your P4/D1 cards.

One use with ISO and another one use with HU loader.

Suppose to be check your P4/D1 cards.

One use with ISO and another one use with HU loader.
Yes it does seem to work! Looks like mabe we are getting close hope so im missin good porn lol :beer: :beer: :beer:

I've seen those files as evidence of P4/D1 has been hack. Hold on tight guys. That's close now.

Will get back to you guys when I have more stuff about P4/D1 for testing.


Peace.

im missin my cartoons lol hehe lol

Suppose to be check your P4/D1 cards.

One use with ISO and another one use with HU loader.


Looks good on this end as well, read my info with the "ISO" version with no problems. I like many others are ready to get back to their roots (DTV). CHARLIE isnt as bad as they make it out to be, but it appears they are in a world of hurt as we speak with there (ROM3) cards. Any way I'm just rambling on now, but have some karma on me for posting the only P4 file I've been able to verify as doing anything legit.

Keep testing guys great work! :D

Well it is easy to read the card, its hacking it that is the hard part... But hey, its a start..

Well it is easy to read the card, its hacking it that is the hard part... But hey, its a start..I haven't checked out the ULS4
version yet, and I'm interested in seeing if it has been slowed down in the ini
to surface scan, to mimic the ISO version. There are only two ways into the P4/5. One is Back door via ISO, (similar to how we got into the H card: "via" the E hole.) (I've been on this since goodbye HU). I haven't found the back door entry as yet. Because the reads from iSO loaders with flashes like "wild thing" ETC, tend to splash back data of it's own, when the card isn't asked a question correctly. The other way is ultra high speed glitch, with equipment not yet available to us from it's inventors. The program listed here is surface reading the card. That by no means says "we're in the card". That's why most all of the first scripts that were released, were B.S. Those that wern't old rehashed "H" card scripts, were trying to "glitch" a P4/5 with an ISO. "Ain't" gonna happen". But this script is set up to surface read info we can all use. I like that part of it. I'll get back to you when I get time to test the ULS4 version.

I haven't checked out the ULS4

I tried it all I can say for now is that it worked.

I tried it on a x-sub P-4 and my two subed P-5/D1 cards and it read the info from all three.

man i hope something comes out soon cause i am goin nuts without my 590's

Suppose to be check your P4/D1 cards.

One use with ISO and another one use with HU loader.Du70, I want to thank you very much for posting this. I'd like you to PM me and tell me where you got it. This script is the "missing link" for myself and other Mods who have been working very hard on an unmarry script, which will be the first time we can attack the card and force it to do something for us. We have a "P4 team" working in the shadows to try and release a script for all hackers
as "FREEWARE". This card checker script conjoined with our efforts puts us "very close" to releasing that freeware. The card checker script makes the card spit out the precious Cam iD and the cards history and condition. Now I can say with "all" certainty": the P4/5 cards "will" be hacked and "soon". Thank
you.
Dezzie

What R the loader's settiing for the ULS4

Excuse my stupidity . . . . I have not done much reading since the HU days. But when I read about the P4, I get confuse. Since the P4 is the later thing and some of the readers are novices to the P4. I will like to see more explanation of the information that is presented. For example: UL4S flash . . . does the flash have the same settings as the HU’s settings? The same thing for the ISO . . . . ISO-7816? 3.6864 crystal or 1.8434?. In essence I am asking that the information be a more detail. I don’t mind reading 10 pages, but I will like to have clean information when I am done reading. Thank You All . . . . with out you I am nothing.

Du70, I want to thank you very much for posting this. I'd like you to PM me and tell me where you got it. This script is the "missing link" for myself and other Mods who have been working very hard on an unmarry script, which will be the first time we can attack the card and force it to do something for us. We have a "P4 team" working in the shadows to try and release a script for all hackers
as "FREEWARE". This card checker script conjoined with our efforts puts us "very close" to releasing that freeware. The card checker script makes the card spit out the precious Cam iD and the cards history and condition. Now I can say with "all" certainty": the P4/5 cards "will" be hacked and "soon". Thank
you.
Dezzie
Is this the same one you post on other site dezzie and changed the name and stated that you changed it to work better? oh sorry smoother....lol they are the same script every line. Got alot of praise for that didnt you.... very sad :sad: Well maybe someone is just pretending to you maybe thats it.....

#1 I didn't change the name. It's still Card Checker. But the package I put together with the Flash and winex ini is called "Giant step for man". #2 I "never" took credit for writing it, in fact in my posts I specificly say that "I didn't write it". #3 As far as improving on it, "we did". And if you read my reply to the post, I even ask where DU70
got it, because I wanted to praise the script writer, and ask if we could combine forces
to crack the P4/4 card completely. And I think this file should be posted on all sites, to give all writers a chance to see the first "non BS program". I posted it elsewhere just like Du70 got his version; "elsewhere". So your "tag" is right on the money. You are "Very Confused"

dam dezzie you got everyone going crazy ;)

ok Super mod at little place why i said that was i download this file there its clearly renamed (P4-5 Card check) now lets see i was going to post it here seem to work good. Then i thought well maybe i should check around here before posting. Nothing seemed to match name but i find this one here and seen your name.Said to myself i better check the two out together and low and behold they were the same but different names!! Now your main file might be what you said, but the name the the working file is clearly been renamed!!!! So i dont think i am confused bro, thats a front for ppl that are dum enough to by it! Hole point here renameing files is just plain stupid we left that back in the hu days when ppl did that stuff to get ego boosts!

If I was trying to boot my ego, I would have taken credit for writing the file. And I've been a "Mod" on various sites for many years. And I find it hard to conceive that you have a problem with "Card Check". Gee I left out the "er". I don't feel I'm guilty of anything here at all, unless you're pissed I spread the file around. But it didn't originate here anyway. Du70 found it on another site. If we are going to start flamming away at one another, lets find a good reason to do it. In the meantime I'm going to take what I learned from this script and add it to the one's I've been writing and see if we can't
make the next step.; a file that will unmarry and wipe. Maybe others with a lot more talent than me and my team will see the file somewhere and do the same, and even faster than we can. I hope so. Because that's what this is all about; step by step, till we have T.V. again.

I just read my P4 non-sub'd card with an old ISO programer and it worked great.Slap me if I'm wrong but isn't this a good thing?

this is a great breakthrought it won;t be long. we will have a 3m file soon to write to the cards.

is it me or is this the same info you can get from the IRD ??

the ird doesn't give you the ATR and Cam ID

Excuse my stupidity but could someone walk me through the process of getting this f....ing card to spit out it's ATR. I have a T911 with only the number 5 switch on as I read it. Now when I open up winex and load card checker it gives me a reset failed when I click on read card info it's trying to reset it but it fails where am I wrong

Dobe,what flash are you using?I read my card with an old ISO programer with a 3.57 crystal that I've had from the H card days.It worked without a hitch.No dips to set,no flashing needed.There is a UL4S script out but I haven't tried it yet.Try dips 2 and 5 on config to HU not unlooper.

I just read my P4 non-sub'd card with an old ISO programer and it worked great.Slap me if I'm wrong but isn't this a good thing?
hopeful63 ;
I think thats it nice that the info can be read from the card, but on the other hand I don't see it as a giant step forward toward being able to program the card. I am an eternal optomist and believe that someday we will be able to somehow alter the state of the P4/P5/D1 cards. I would not term this to be a hugh break through, but rather a very small step in the right direction. There still is a long, long way to go before the general public (thats us) will have the tools to play with this thing. Just my .02
Cheers :beer:
5755hsa..................

this is a great breakthrought it won;t be long. we will have a 3m file soon to write to the cards.lol it wont happen with a iso programmer in one hand and a beer in the other but yea i guess :D

Hopeful and dobe....try 1 and 5 down and leave it like that when you open up card checker.....