its crap

runs better with card out lol

so in other words it doesnt work?

1.First even if you want to try this out you would need to know what flash to use if your using a loader? or is a iso required ?

2.Where did this file come from?

Call Sc.MsgBox("P4Extreme.tv Act Assault v1.0 ...Setup..Use P3 settings... Data Baud 9600... Reset Baud 38400. Then check both echo boxes, Flush echo bytes and Flush buffer. Next go to advance and check Device Reset(no atr). Then go to program settings uncheck Log Transactions, Display Fuse Byte, and Display USW. Then save the settings. Run script..then reboot ird go to to ppv hit buy a movie.... These Setting May not work for everyone so make setting adjustments as you feel needed")

Call Sc.MsgBox("Setup..Use P3 settings... Data Baud 9600... Reset Baud 38400. Then check both echo boxes, Flush echo bytes and Flush buffer. Next go to advance and check Device Reset(no atr). Then go to program settings uncheck Log Transactions, Display Fuse Byte, and Display USW. Then save the settings. Run script..then reboot ird go to to ppv hit buy a movie.")
Sc.ByteDelay = 1000
Do
Call Sc.Msgbox ("P4Extreme.tv Act Scan v1.0")
Call P4Extreme()

Use P3 settings? LMFAO Don't any of you understand that the P4/D1 card cannot be glitched into like the P3? Another useless waste of time. As the Brits say, it's a total wank.

LMFAO Don't any of you understand that the P4/D1 card cannot be glitched into like the P3?

Sorry but no I'm having a hard time understanding that.
Oh I've read all about it but where does that info come from?
Do you know that for a fact or did you just read it somewhere like the rest of us?
Do you work for D.A.V.E.?

Can you say ASIC?? :rolleyes: :rolleyes:
5755hsa...................... :beer:

Do you work for D.A.V.E.?


ROFL!

I used the p4 extreme, it started real good, but then it gives me script error
on line 56. sc read time out reading data from card 2 bytes requested, 0 bytes read
can anyone tell me why!

balahahahahahahaha

Call Sc.MsgBox("Setup..Use P3 settings... Data Baud 9600... Reset Baud 38400. Then check both echo boxes, Flush echo bytes and Flush buffer. Next go to advance and check Device Reset(no atr). Then go to program settings uncheck Log Transactions, Display Fuse Byte, and Display USW. Then save the settings. Run script..then reboot ird go to to ppv hit buy a movie.")
Sc.ByteDelay = 1000
Do
Call Sc.Msgbox ("P4Extreme.tv Act Scan v1.0")



Call P4Extreme()


First couple of points :


What flash or programmer will work with this ? Iso programmer? ect ect
Who has usd this and detail what they have used and hat settings?

Is it a new flash or a iso or a loader??????


Obviously when you post something like this you would assume that who ever is using it would explain?

My bet is that they cant cause the card is not glitchable ?

i have a friend who said his friend used this file and it works.....
as far as i'm concerned this file is BS......
I know his friend and i don't belive a word that comes out of his mouth..........

I'm not wasting my time ..........i'm not the best tester.....but i know shit when i smell it.

what happened to the guy with themovie clip of something working ?

to glich in to the P4 u must hook up a more power like 115 AC u will get in faster then u could the P3 LOL (More Power)

Read this, it's great insight. I didn't intercept this. But a vey reliable souce did.
If you take the time to read every line, by the time you've read it all, you'll know the geek being interviewed speaks from the "KNOW". :wow: :wow:

And I Bet He Doesnt Even Watch Tv! Sheww Time For A Beer@@

Who'd have time for T.V. with all that sh*t go'in on.
And I'd bet my loader he doesn't drink beer!

Well i dont know nothing about the file posted but i do believe that most of the testing on the p4 card has been a ISO loader and the p4dump was from a iso loader too. just my opinion from reading.....

Unfortunately, I was a real beleiver in the ISO method of compromising the P4. It worked to a certain extent because it can surface scan the chip for the basic info. But "all" the Data returned isn't from the card. The chip has a way of splashing or pissing back at the loader and returning false info. The only info returned with any certainty is the ATR. Until the back door(s) is found, no script with an ISO loader will "ever" write to the card. The high speed glitch using ASIC technology is our best hope of a solution to our problem. It's time we fessed up to the fact that this is "new" technology we are facing here, and that's why the P4 has been out for 2 years and no answers. We don't have Dave's budget, but we have the "brains". Our Geeks will figure it out if they haven't already. But I'm not as optimistic this week as I was last week that it will be on, or ready for the download area any time soon.
Get out your rabbit ears!

i love geeks!! hear me guys? lmao