Hello all this is my first post so if I screw up feel free to delete. I'm a newbie at this dish stuff. Been doing alot of reading on several sites. Finally had good luck with my first project rom2 and 3700. Just tried a streamlocked rom10 a21 today using dish_a21_opener (which i got from maestra along with this C/P) with winex5.0. At first no luck with echostar settings then after more reading I came across this info which is of course a ****C/P**** . Well after 3 tries I got in and was able to get a 1 step backup in nagra 4.1. Now I can get in as I please (at least so far)(also I'm sure I probly marked the card from previous failed attempts or from this program although I don't yet know how to check). I really don't know much about what I'm doing. So if any of you old pro's think this is a bad thing I appologize. Here's the ***C/P***:
__________________________________________________
__

Try winex 5 and this was paired with the file as suggested settings but appears to be for hte 382 unlocker.... try it tho:

communication tab

com= pick your port
data baud=115200
reset baud=115200
parity =none
rec timout=1000
byte delay=100
reset delay=100
stopbits =1
byte convention= direct
flush echo bytes= no check
flush receive buffer= check

===========================
advanced tab

check device reset(no atr)
no check ignore receive timout
dtr= low
rts= high
toggle line =rts

save you settings to loader2
make sure it is set to these settings.

__________________________________________________
__

Again I'm not trying to step on toes or do I know how this truly affects the card as I am a dumba$$ still when it comes to this dish stuff. I have seen other people say this file doesn't work. So please USE AT YOUR OWN RISK.
I don't want to be blamed for screwing up cards it just seemed to work for me.

p.s. Thanks for all the valuable info for this old dave junkie just trying to help