s.ross
08-28-2009, 09:43 AM
Step #1: Extract files onto a memory stick
Step #2: go to Menu --> Configuration --> System Recovery and select delete all channels, then select factory set. This will ensure that loading works properly.
Step #3: go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the factory bin(version 1.76)
Step #4: go to Menu --> Configuration --> System Recovery and select factory set.
Step #5: go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the latest bin(version 2.02 at time of writing)
Step #6: go to Menu --> Configuration --> System Recovery and select factory set.
Step #7: Plug the khub into the receiver using the black serial cable, also plug in the power adaptor and the network cable running to your router.
Step #8: go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the khub activation bin(khub.rom)
Step #9: go to Menu --> Installation --> Option and make sure all AU options are set to off and Mode is set to Network
Step #10: go to Menu --> Installation --> Dish Settings and configure the satellites you have setup the dishes for then press the red button on each satellite to scan in the channels.
Step #11: go to Menu --> Installation (maybe Configuration?) --> Network and change the mode to DHCP then press the green button on the remote and wait for it to complete
Step #12: Once the previous step has completed turn the receiver off with the remote, then from the back. Wait 30 seconds then turn the unit back on and everything should be working.(everything being all the currently working channels, not necessarily every channel in your list)
Step #2: go to Menu --> Configuration --> System Recovery and select delete all channels, then select factory set. This will ensure that loading works properly.
Step #3: go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the factory bin(version 1.76)
Step #4: go to Menu --> Configuration --> System Recovery and select factory set.
Step #5: go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the latest bin(version 2.02 at time of writing)
Step #6: go to Menu --> Configuration --> System Recovery and select factory set.
Step #7: Plug the khub into the receiver using the black serial cable, also plug in the power adaptor and the network cable running to your router.
Step #8: go to Menu --> Utilities --> Data Transfer --> Data Download from USB Storage, then select the khub activation bin(khub.rom)
Step #9: go to Menu --> Installation --> Option and make sure all AU options are set to off and Mode is set to Network
Step #10: go to Menu --> Installation --> Dish Settings and configure the satellites you have setup the dishes for then press the red button on each satellite to scan in the channels.
Step #11: go to Menu --> Installation (maybe Configuration?) --> Network and change the mode to DHCP then press the green button on the remote and wait for it to complete
Step #12: Once the previous step has completed turn the receiver off with the remote, then from the back. Wait 30 seconds then turn the unit back on and everything should be working.(everything being all the currently working channels, not necessarily every channel in your list)