my cw ultima is stuck, I turn power on,it appears (boot).
I am a new with this cw ultima, I just buy it last week.
Please explain me how to reboot it back,need your help.

Thanks

Give a little more info. I've got one also and I noticed that they need a little more attention than the CW800S. Let me know how I can help you.

Hi Genie,
At first, I could load bin or scaned and power off and on,there's no problem.
quality and strenght level are good is 85% and more to 93% .I've an old Pansat@fortec star ultra .I just bought this CW ultima last week . so when I TRIED to new bin,it's not work either. I GO IN (the FORUM) and then to put 1.94 by cw700's teller .I FOLLOWED by his instruction, by then I LOAD new bin and load 1.94, it's blocked and I waited too long and after that I turned the power off and turn it on again,it's stuck now. IT show ( Boot) on the screen everytime I turn swicth on,not respond.
I think it may be black out, the power or something else.So could you help to reboot it back,Brother ??? . how can I DO IT ? your ideas can save my sats, THANKS BROTHER in advance.
kyle

Kyle,
Double check to see if you installed the right bin. It looks as if you used a bin for a CW700. If so, there may be a serious problem. You need to use the lates CW Ultima file. (CW_Utima_V1.27_2009_02_16.zip) Try a hard reset by using the switch in the back. If you can access the menu features, do a factory reset, then load the latest bin file. (CW_Utima_V1.27_2009_02_16.zip) Setup your Sats and Blind Scan for the channels. Apply the patch, (F1 0000) and enjoy tv.

We have the new cw ultima, is there a step by step instruction for loading in onto the usb??? Been at this for 3 days going crazy!!! Do we still need to use a loader like with coolsat????

Tambla,
1st download the latest bin file located here (http://forums.dsstester.com/vbb/attachment.php?attachmentid=31663&d=1235131965) and save it to your USB drive.
2nd insert USB into receiver. Press USB button and select the previously downloaded file. Allow it to install completely and reboot.
3rd set up sats and do a blind scan for each satellite you are pointed at.
4th press F1 then 0000 to enable the patch. At this point you should have some TV.

Thanks for the quick response, but still no luck. only gave us 31 channels???? and we are not even able to get them up, the next messagethat we receive is weak signal and yet we are getting a signal of 85. Us damn newbies know nothing haha!!!! Thank you again, any more suggestions greatly appreciated. Tammy

please i bought the ultima 3 weeks ago and i went to load .bin 135 then it stopped in the middle of loading it from the usb so i waited for an hour and it was still stuck so i cut it off from the back and cut in back on now it stuck on boot but if i hold power button on front and cut off from back i get night rider lights 4 - - - - but if i cut back off and back on its on boot please help me i tried to load new bin with a fortec mercury 2 cable but it want load

please i really need help wit my cw ultima it still stuck on boot and i cant load nothing with the rs 232c cables any help would be very helpful and appre.....

Try using the 232 cable to restore a factory bin. I have no real experience with the 232 as I use the USB primarily. Perhaps one of the more knowledgable members help out.

I haven't tried loading thru cable with the Ultima but did w/ the 800. Should be the same, you need to:
Download CW loader(use the search option on this site)
Download the latest Ultima file
Only using the RS232 cable that came with the Ultima, connect your Ultima to your computer.
Using your computer, open the loader
Select the latest using the browse button
Start the download, DO NOT INTERRUPT SOFTWARE UPDATE!