I was just poking around the setting of my CW700s (It's on a bev dish with only 91 LNB that was left behind by the people that were in this apartment before me), and when scrolling though the list of satellites, both 110, and 119 had a strong signal and quality.. so I hit auto scan on each. I scanned and found what I belive are the DN channels.

I have a sign/quality of 81/86 on 213 and similar on other channels. But no EPG and just a 'scrambled channel' message. THe bev channel, what's still working are fine. I'm on bin 196.

So what did I just do?

Bin 1.96 does not work properly. The majority of channels are scrambled.
Select whatever satellite shows up on the bottom of the screen such as Nimiq1 or Echostar_ _. Set auto roll and press F1 0000

Your setup is probably incorrect. You get the channels from the bird you are pointed at. If you are pointed at 91, then those are the channels you will receive, not the ones from DN. All channels from 91 will be gone very soon since they are switching over to N3. If you are getting DN channels, you are aimed at one of their birds.