I have a para todos dish(oval) and I'm getting 119 and 110( From Dave and using two receivers 5th gen) now I want to start to test dishnet,and I would like to know if I can use the current dish that I have and be able to use two different recievers,one RCA 5th and the other one DP301?Thanks
BTW I have a dual LNB and 4 way multiswitch

This what you do, stick a third lnb in the middle slot..that will be the 110 sat...you right now have the 119 and 101 in the dish...You will leave a line from the 101 and 119 going to the multiswitch...and you will run a line from the other 119 and the 110 to a sw-21 switch and run that one to the dish network ird...the first one you already have ran to the dtv....and there you have it ...one dish running both a dtv and a dish network ird...

Thank you DbDan,I got it but how am I going to be able to put the third lnb in the middle and be in the right position to get the 110?Thanks again

If you have it with two lnbs for dtv right now you are using the two outside slots which are the 101 and 119 sats...when your put the other lnb in the middle for 110 it will automatically come in without tweaking as long as you already had good signal on the first two...it just works out that way...Let us know of your success or problems...

Thanks,I will let you know how I did it.