Ariza 700 To Pansat 2700 Jtag Conversion
Ok folks here is the conversion for the ariza 700 to pansat 2700...
Now it is a USE AT OWN RISK and also DO NOT PM ME WITH QUESTIONS. To start you will need the files provided in thread... Also if your not good with jtag do not try ..
YOU WILL NEED A JTAG AND ALSO A NULL CABLE TO LOAD FILES
Step 1 Read the instructions provided with jtag info.....( a must)
Step 2 when done with jtagging do not turn off machine unhook jtag
Step 3 open up gt rom loader 27.02 and load pansat 2700 factory bin..
Step 4 load the B75_m fileNow when machine done loading it will reboot do not turn off let it show 8"s goin across then stops on last 8 for roughly 30 sec..
now turn off from back and set up loader...When loader ready turn on from back and at first sign of light hit fix on loader..Do this process for all files...
Step 5 open up BL 1.3 loader and load jvvh 209 file
Step 6 load jvvh 209 file
Step 7 load on the jvvh 211 file
Step 8 load the jvvh 217 file
Step 9 load the jvvh 220 ( the whole time using the BL 1.3 loader)
Step 9 Do blind scans of sats.What u will notice is that your display shows 8's on it dont worry about it at this point just enjoy and watch t.v........And yes your ariza remote will work on this conversion......
REMEMBER READ AND FOLLOW ALL INSTRUCTIONS
Please use the latest bin files after you have completed the last step in the process. Please USE AT YOUR OWN RISK!!!! If you have never used a JTAG cable please ask for some one to help you through it!
All files and loaders are attached in the .rar files .....EXCEPT for the latest bin which can be found in our Files Archives. If you have questions PLEASE post them in the general Ariza discusion area and not here in the files archives.