View Full Version : Setting & Switches For 2 Dn 5oo Dp ** Multi Thread Poster**
Moyster 07-04-2008, 07:27 PM I have 3 receivers; an Ultra VS 2000 and 2 CS 6100 with a DN 500 DP, providing me with the 110 and 119.
WITH THE FOLLOWING SETTING:
With The Following Setting:
110
LNB POWER----------------On
LNB TYPE------------------LEGACY TWIN LNB1
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------LEGACY TWIN LNB2
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
91
LNB POWER----------------- ON
LNB TYPE-------------------STANDARD
LNB FREQUENCY-------------11250
22KHZ-----------------------OFF
TP FREQUENCY---------------12224
DISECQ - --------------------PORT 2
MOTOR----------------------OFF
LEGACY SW------------------NONE
I put in a second DN 500 to get 2 more birds 82.0W (Nimiq 2), and 91.0W (Nimiq 1, 3).
For 1 week the 91 was working and the 110 was lost. I never had the 82.OW
P.S: 119.0W is missing channels (N) 91.0W is not fully working.
The ViewSat shows Auto roll processing and the CoolSat shows Scrambled channels.
Please help with the settings for the 82- 91 – 110 –119,
and also please tell me what kind of switches I need to keep my receivers working properly.
Moyster 07-04-2008, 07:33 PM I have 3 receivers; an Ultra VS 2000 and 2 CS 6100 with a DN 500 DP, providing me with the 110 and 119.
WITH THE FOLLOWING SETTING:
With The Following Setting:
110
LNB POWER----------------On
LNB TYPE------------------LEGACY TWIN LNB1
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------LEGACY TWIN LNB2
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
91
LNB POWER----------------- ON
LNB TYPE-------------------STANDARD
LNB FREQUENCY-------------11250
22KHZ-----------------------OFF
TP FREQUENCY---------------12224
DISECQ - --------------------PORT 2
MOTOR----------------------OFF
LEGACY SW------------------NONE
I put in a second DN 500 to get 2 more birds 82.0W (Nimiq 2), and 91.0W (Nimiq 1, 3).
For 1 week the 91 was working and the 110 was lost. I never had the 82.OW
P.S: 119.0W is missing channels (N) 91.0W is not fully working.
The ViewSat shows Auto roll processing and the CoolSat shows Scrambled channels.
Please help with the settings for the 82- 91 – 110 –119,
and also please tell me what kind of switches I need to keep my receivers working properly.
Moyster 07-04-2008, 07:35 PM I have 3 receivers; an Ultra VS 2000 and 2 CS 6100 with a DN 500 DP, providing me with the 110 and 119.
WITH THE FOLLOWING SETTING:
With The Following Setting:
110
LNB POWER----------------On
LNB TYPE------------------LEGACY TWIN LNB1
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------LEGACY TWIN LNB2
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
91
LNB POWER----------------- ON
LNB TYPE-------------------STANDARD
LNB FREQUENCY-------------11250
22KHZ-----------------------OFF
TP FREQUENCY---------------12224
DISECQ - --------------------PORT 2
MOTOR----------------------OFF
LEGACY SW------------------NONE
I put in a second DN 500 to get 2 more birds 82.0W (Nimiq 2), and 91.0W (Nimiq 1, 3).
For 1 week the 91 was working and the 110 was lost. I never had the 82.OW
P.S: 119.0W is missing channels (N) 91.0W is not fully working.
The ViewSat shows Auto roll processing and the CoolSat shows Scrambled channels.
Please help with the settings for the 82- 91 – 110 –119,
and also please tell me what kind of switches I need to keep my receivers working properly.
Why so you multi post and posted all over the forums?????????????????:mad:
If there is no one answer your question, it doesn't mater how many thread you posted, you will not get your answer faster.........................:mad:
Moyster 07-05-2008, 01:11 PM I have 3 receivers; an Ultra VS 2000 and 2 CS 6100 with a DN 500 DP, providing me with the 110 and 119.
WITH THE FOLLOWING SETTING:
With The Following Setting:
110
LNB POWER----------------On
LNB TYPE------------------LEGACY TWIN LNB1
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------LEGACY TWIN LNB2
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
91
LNB POWER----------------- ON
LNB TYPE-------------------STANDARD
LNB FREQUENCY-------------11250
22KHZ-----------------------OFF
TP FREQUENCY---------------12224
DISECQ - --------------------PORT 2
MOTOR----------------------OFF
LEGACY SW------------------NONE
I put in a second DN 500 to get 2 more birds 82.0W (Nimiq 2), and 91.0W (Nimiq 1, 3).
For 1 week the 91 was working and the 110 was lost. I never had the 82.OW
P.S: 119.0W is missing channels (N) 91.0W is not fully working.
The ViewSat shows Auto roll processing and the CoolSat shows Scrambled channels.
Please help with the settings for the 82- 91 – 110 –119,
and also please tell me what kind of switches I need to keep my receivers working properly.
Moyster 07-05-2008, 01:18 PM Setting & Switches For 2 Dn 5oo Dp
I have 3 receivers; an Ultra VS 2000 and 2 CS 6100 with a DN 500 DP, providing me with the 110 and 119.
WITH THE FOLLOWING SETTING:
With The Following Setting:
110
LNB POWER----------------On
LNB TYPE------------------LEGACY TWIN LNB1
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------LEGACY TWIN LNB2
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
91
LNB POWER----------------- ON
LNB TYPE-------------------STANDARD
LNB FREQUENCY-------------11250
22KHZ-----------------------OFF
TP FREQUENCY---------------12224
DISECQ - --------------------PORT 2
MOTOR----------------------OFF
LEGACY SW------------------NONE
I put in a second DN 500 to get 2 more birds 82.0W (Nimiq 2), and 91.0W (Nimiq 1, 3).
For 1 week the 91 was working and the 110 was lost. I never had the 82.OW
P.S: 119.0W is missing channels (N) 91.0W is not fully working.
The ViewSat shows Auto roll processing and the CoolSat shows Scrambled channels.
Please help with the settings for the 82- 91 – 110 –119,
and also please tell me what kind of switches I need to keep my receivers working properly.
mlew2 07-05-2008, 01:22 PM Why so you multi post and posted all over the forums?????????????????:mad:
If there is no one answer your question, it doesn't mater how many thread you posted, you will not get your answer faster.........................:mad:
And has been reported
mlew2 07-05-2008, 01:23 PM Why so you multi post and posted all over the forums?????????????????:mad:
If there is no one answer your question, it doesn't mater how many thread you posted, you will not get your answer faster.........................:mad:
Reported
chuck 07-05-2008, 02:16 PM We will leave this thread open...you are very lucky you arent in our Dog House
READ OUR SITE RULES!!!!!
jd1122 07-05-2008, 02:49 PM I have 3 receivers; an Ultra VS 2000 and 2 CS 6100 with a DN 500 DP, providing me with the 110 and 119.
WITH THE FOLLOWING SETTING:
With The Following Setting:
110
LNB POWER----------------On
LNB TYPE------------------LEGACY TWIN LNB1
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------LEGACY TWIN LNB2
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
91
LNB POWER----------------- ON
LNB TYPE-------------------STANDARD
LNB FREQUENCY-------------11250
22KHZ-----------------------OFF
TP FREQUENCY---------------12224
DISECQ - --------------------PORT 2
MOTOR----------------------OFF
LEGACY SW------------------NONE
I put in a second DN 500 to get 2 more birds 82.0W (Nimiq 2), and 91.0W (Nimiq 1, 3).
For 1 week the 91 was working and the 110 was lost. I never had the 82.OW
P.S: 119.0W is missing channels (N) 91.0W is not fully working.
The ViewSat shows Auto roll processing and the CoolSat shows Scrambled channels.
Please help with the settings for the 82- 91 – 110 –119,
and also please tell me what kind of switches I need to keep my receivers working properly.
first of all there is no need to triple post and just for starters you state you have a dish 500 with dp lnb's so why are you useing legacy and standard settings for lnb type.post your problem one time in one thread and you will receive help.
I neg rep you -11 points, so this will keep you a live, so yo ucan post, you will not be that lucky, because if you had to moved your thread again, I will lock you up, and throw away the key.
anyway here is you answer:
110
LNB POWER----------------On
LNB TYPE------------------OSC-DP
LNB FREQUENCY-----------11250
22KHZ---------------------OFF
TP FREQUENCY-------------12224
DISEQC-1.0----------------PORT 1
MOTOR--------------------OFF
LEGACY SW----------------NONE
119
LNB POWER ----------------ON
LNB TYPE-------------------OSC-DP
LNB FREQUENCY-------------11250
22KHZ----------------------OFF
TP FREQUENCY--------------12224
DISEQC- 1.0----------------PORT 2
MOTOR---------------------OFF
LEGACY SW-----------------NONE
what type of switch do you use to combine the 110, 119, 82 and 91? also what type of LNB do you use for 82 & 91?
|
|