Here is the 1st FACTORY eSATA PVR file & manual for the 9200HD.




Technical Bulletin (June 18, 2008)


Subject : e-Sata External PVR Operation Ready Fix
Model : Pansat 9200HD Early Production (sold before Jan, 2008)
July, 2007 (S/N : 7H~ series)
Oct, 2007 (S/N : 7J~ series)
**** Nov, 2007 (S/N : 7K~ series) production OK (sold after Feb, 2008)

Modification : Relocate TR Q3 (MMBT 2222A Fairchild) as per attached photo.
Verification : After relocating the Q3 TR base (or C178) the voltage should be 1.8V DC from 0V

Recommendation


1. Find and hire an excellent qualified technician nearest to your location.
2. Desolder & remove the part TR(Q3) quickly. (Not more than 2~3 seconds to avoid PCB pattern damage)
3. Clean the main PCB board Q3 TR area and removed TR legs and solder again with new direction
as per the attached photo. (Should you need new TR, contact the Panarex Service Dept to request it)
4. You need to check the C178 leg (or TR bare) measures 1.8V DC.
5. In case you make mistake on the PCB board and can not make the modification correctly,
send back the whole unit to the Panarex Service Dept.