Found these files on another site tested and working. Sorry no JTAG version available.

Chose Either 1 (Puff) (Lzma).

Post if any problems.


Thanks To the Great Site.

http://forums.dsstester.com/vbb/showthread.php?t=117402
These files were already posted earlier today...!!! no need for double-postings...

Does bin Jvvh_260_Nkk_Lzma work for fortec converted to pansat 2700?

Can any one please help. I have converted the 2500 -2700 b75 pansat to the puff and downloaded the pin 254 and it was working fine. but now it seems that i can't down load any new puff bins. the receiver doesn't take it. I tried to down load 260 while the receiver is on, didn't work, I did trun the receiver off from the back and tried to download several times to get the best timing and it doesn't work. what am I doing wron, can you please guide me to download 260 puff. Thanks

BAsic 2500 downloading techniques still apply..\

get bin loader and bin file ready to download... turn receiver OFF at rear... then ON.. at FIRST activity on display, hit DOWNLOAD....

Enjoy...

Jvvh_Fortec-Pansat_CanAm_(PUFF)_253 / 2500 to 2700
________________________________________
C/p from Fwank7.

Here is the new PUFF 253 bin for those who want to start converting to PUFF now.

Also is the Loader and Boot60 zip. In that zip file is the 2700 to 2500 convertor loader by Chancysand as well as the boot60 bin file.

Jvvh_Fortec-Pansat_CanAm_(PUFF)_253(640k) bin is the "MUST LOAD FIRST BIN" to get you converted to PUFF.


Quote:
How to Load.

Open 2700 to 2500 Loader Converter.
Click Bin File, choose Boot60.
Turn reciever ON.
Let reciever fully boot up ,soon as you see ON hit Download.

Write will complete in 10-15 seconds.
Reciever will self reboot with knight rider dash (- - - -) rolling across display screen.

LEAVE RECIEVER ON DO NOT TURN IT OFF.

Open FortecStarSTB loader or whatever Loader you use before.
Load Jvvh_Fortec-Pansat_CanAm_(PUFF)_253_(640K) bin.
Hit Download.

After download complete reciever will pause on dash.
Reciever will self reboot to knight rider dash (- - - -) "again".
It will pause on 4th dash for 3-5 minutes DO NOT reboot reciever LEAVE it alone.

Reciever then will self reboot with P U F F _ P U F F then pause on F for 30 seconds then display ON.

You can then load channel list Or just hook up to Sat cable and TV and rescan your sats again.

I myself did a Factory Setting in main menu first then rescan my Sats.

Thanks again to Jvvh for all he has done and also Ukronic for all he has done for me!!


Set Default Key and let it A/R.
Turn A/R OFF (except Key Code) if experiencing rebooting issues.

No need to do a factory setting in main menu if your not having problems.
Do one if you are experiencing problems.

Both bins are clone safe.

What does (Lzma) means?

What does (Lzma) means?

(Lzma) is a higher compressed file format to let larger filles to be loaded as (bin) if you are using the olded 2500 to 2700 files a lzma or puff file will not work, BUT look for (dsstester-LZMA_(PUFF.).zip ) file and read info, if took 15 sec to load and then the lastest( LZMA ) file will load.
I found to load 260.bin if you set up loader program find new bin to load, click write then power on sat . this worked for me on the last 3 units I loaded

GOOD LUCK PS: reading did help me

Thanks I will try it.

very simple to convert to PUFF ,loaded latest 260 bin working great....

:yes: :blink: :wow: :rolleyes: Found these files on another site tested and working. Sorry no JTAG version available.

Chose Either 1 (Puff) (Lzma).

Post if any problems.


Thanks To the Great Site.

after loading this 260 bin ird frozed anybody has same problem ,does it confirm is working....:no:

Thanks, to TxiDrvr/daru786/redhead.
Converted to puff and loaded 260. Works great.

work great here

if anyone could help me perform this task, it would be greatly appreciated;
i have a fortec lifetime ultra used to load with bl 1.4 loader
would like to convert receiver so i can load new bin files
after reading post by daru 786 i thought i had handle on, but not so;
bl 1.4 loader can i use it to convert boot file and new bin files
could someone please give me step by step and which files
greatly appreciated

Please, Please, beadvise I have pansat clone 2700a converted, I could find out right file still now, because of complecation of (LZMA)(Puff), mine one is B-75

Thanks in advance