satrider
08-21-2002, 07:46 PM
Really need some help with this one!!!
OK I hear the ecm did not affect the plastic...only the tsop.
I was running two rom 3 with godings rev a 3ne 3M / Blocker.The 2700 just needed to have the tsop fixed and rewrote and it's up. The 3800 uped to a 3900 fixed and rewrote the tsop but only get 101...prog menu...and headings with no vis or audio and then blackout.
I checked the eeprom and is was marked FF at E007. My original dump was 24 at E007. I have cleaned and applied the 007 map fix with no go...applied the rev A ne3 on to this...no go. I have editted the cam to another ird and...no go I put the original dump back..cleaned and patched goding and went back to FFno go
The big question is whats going on and what can I do to get this card up cause I'm stumped
OK I hear the ecm did not affect the plastic...only the tsop.
I was running two rom 3 with godings rev a 3ne 3M / Blocker.The 2700 just needed to have the tsop fixed and rewrote and it's up. The 3800 uped to a 3900 fixed and rewrote the tsop but only get 101...prog menu...and headings with no vis or audio and then blackout.
I checked the eeprom and is was marked FF at E007. My original dump was 24 at E007. I have cleaned and applied the 007 map fix with no go...applied the rev A ne3 on to this...no go. I have editted the cam to another ird and...no go I put the original dump back..cleaned and patched goding and went back to FFno go
The big question is whats going on and what can I do to get this card up cause I'm stumped