I am not really a newbie, I am new to this site.I have been doing this for awhile and I have my SV8K running Dik 110, 119, 129, Bev 91, 82 I have 110,119 on a dish 500-DP plus, 129 on dish 300 running to the DP-Plus - one cable running from the DP Plus to an Ecoda 22khz. and 91, 82 on a dish 500 DP-Twin, one cable to the other side of Ecoda the ecoda hooked to a Dish Pro power inserter from a DP-44 switch. This set up works so well it has gotten boring so I am buying a Dreambox to see what I can do w/ one of these. I was wondering if the Dreambox will support my setup.I have not brought one yet,as I wanted to research first.Does the DB have programs for autoroll or do you run plastic in them,I was looking at the Nfusion but it only has a 120 Mhz. processor and only been around for a year.I think a Dreambox has alot more to offer for the same price. I am having trouble finding info on it. are there programs or plastic? and does it supports 22 khz. satt. switching.

To answer a few of your questions. First i am referring to a Dreambox 500s as that is what i have and can give correct information on it.
1. 250 MHz
2. Linux Operation System
3. Smartcard reader (However not needed at this time for viewing DN OR Bev
4. Mpeg2 Decoding
5.100Mbit full duplex Ethernet Interface
6. Does support following Satellite Configurations
a. one single satellite
b. 2 satellites via Toneburst
c. 2 satellites via 22khz (only Highband)
d. 2 satellites via DiSEqC A/B
e. 4 satellites via DiSEqC OPT A/B
f. many satellites via DiSEqC Rotor
g. non standard user defined configuration