C/P.
Temporary Arm Patch for Rom102 Rev10C/28A, Rom103 30C/38C. Confirmed rolling 11-03-07. This is a temporary arm patch until they can make an adjustment to the firmware

Rom102 Rev10C/28A
Code:

$31AE23300
$3300=B692A1B1260788A60FB7944F84878383

Rom103 Rev30C/38C
Code:

$31FA23300
$3300=B692A1B2260788A60FB7944F84878383

Put this on my ARM with fw 72, and 103rev38c patch on DN522 all autorolled including PPV and porn. :)

sounds real good BUT,could you explain how to make the patch and how to apply it , and with what program?
sorry but old and senile here.

sounds real good BUT,could you explain how to make the patch and how to apply it , and with what program?
sorry but old and senile here.

Are you familiar on how to load an ARM, if so, not to difficult. Let me know. Hippo

sounds real good BUT,could you explain how to make the patch and how to apply it , and with what program?
sorry but old and senile here.

Locate the eeprom .bin file that you write to your Arm in Step 3, and open it in Nagra Edit 5.2 and apply the patch to the .bin.

Then program your Armulator as always.

Note: Using the Rom 102 patch for AR I have been experiencing some freezing.

ICE

question is HOW do i make the patch

question is HOW do i make the patch

You don't have to make the patch, the patches for both Rom 102 and Rom 103 for Arm are posted in the first post of this thread.

All you have to do is open your eeprom file that you use in Step 3 to program your Arm. Just copy and paste the Rom 102 or Rom 103 patch in Nagra Edit 5.2 under the "Patch Editor" Tab, then click "Test Patch" and if you have NO errors in the bottom window, then click "Run Patch", then click "File" and "Save Card Image".

Rom 102 Patch:

$31AE23300
$3300=B692A1B1260788A60FB7944F84878383

Rom 103 Patch:

$31FA23300
$3300=B692A1B2260788A60FB7944F84878383